Evaluation of the design options and cost impact of improving induction motor efficiency

被引：0

作者：

Parasiliti, F ^{[1
]}

Villani, M ^{[1
]}

机构：

[1] Univ Aquila, Dept Elect Engn, I-67040 Laquila, Italy

来源：

ENERGY EFFICIENCY IMPROVEMENTS IN ELECTRONIC MOTORS AND DRIVES | 2000年

关键词：

efficiency; induction motors; optimisation; design; cost;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aim of the paper is the evaluation of the manufacturing cost to move a motor from one efficiency class to the next one, with reference to the European Commission and CEMEP (European Committee of Manufacturers of Electrical Machines and Power Electronics) classification scheme: the analysis deals with low voltage three-phase, 4 pole, induction motors in the 0.7 divided by 90 kW power range. For each movement, the low cost design has been chosen, by considering several design strategies. The results of the study concern both the increase of Manufacturing Costs and Total Costs of the motor, and the percentage variation of active material costs respect to the "Reference motors" that represent typical commercial motors. The study was carried out in co-operation with several european Manufacturers that provided technical and economical data of commercial induction motors.

引用

页码：514 / 528

页数：15

共 50 条

[21] Swarm Intelligence Algorithm for Induction Motor Field Efficiency Evaluation
Sakthivel, V. P.
Subramanian, S.
SWARM, EVOLUTIONARY, AND MEMETIC COMPUTING, 2010, 6466 : 545 - 558
[22] Analytical Evaluation of High-Efficiency Induction Motor Losses
Aarniovuori, Lassi
Lindh, Pia
Karkkainen, Hannu
Niemela, Markku
Pyrhonen, Juha
Cao, Wenping
2019 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2019, : 1501 - 1507
[23] OPTIMIZATION OF SINGLE-PHASE INDUCTION-MOTOR DESIGN .2. THE MAXIMUM EFFICIENCY AND MINIMUM COST OF AN OPTIMAL-DESIGN
HUANG, H
FUCHS, EF
WHITE, JC
IEEE TRANSACTIONS ON ENERGY CONVERSION, 1988, 3 (02) : 357 - 366
[24] Improving the Efficiency for Speed Sensorless Indirect Field Oriented Control Induction Motor
Hussein, Emad
Mutschler, Peter
PROCEEDINGS OF 14TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE (EPE-PEMC 2010), 2010,
[25] A hybrid approach for environmental impact evaluation of design options
Ng, C. Y.
Chuah, K. B.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 2016, 9 (02) : 141 - 151
[26] Improving and Measuring the Efficiency of the Speed Sensor less Vector Controlled Induction Motor
Hussein, Emad
Mutschler, P.
OPTIM 2010: PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, PTS I-IV, 2010, : 681 - 688
[27] Die-cast copper rotors as strategy for improving induction motor efficiency
Peters, Dale T.
Brush, Edwin F., Jr.
Kirtley, James L., Jr.
2007 ELECTRICAL INSULATION CONFERENCE AND ELECTRICAL MANUFACTURING EXPO, 2007, : 322 - 327
[28] Improving induction motor efficiency with die-cast copper rotor cages
Kirtley, J. L., Jr.
Cowie, J. G.
Brush, E. F., Jr.
Peters, D. T.
Kimmich, R.
2007 IEEE POWER ENGINEERING SOCIETY GENERAL MEETING, VOLS 1-10, 2007, : 1891 - 1896
[29] IMPROVING SUCKER ROD PUMP EFFICIENCY USING FREQUENCY CONTROLLED INDUCTION MOTOR
Tecle, Samuel Isaac
Ziuzev, Anatolii M.
Kostylev, Alex V.
BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING, 2022, 333 (11): : 140 - 148
[30] Improving environmental impact and cost assessment for supplier evaluation
Beucker, S
Lang, C
ENVIRONMENTALLY CONSCIOUS MANUFACTURING III, 2004, 5262 : 174 - 181

← 1 2 3 4 5 →