Microstructural changes in long-time thermally exposed Ni-base superalloy studied by SANS

被引:14
|
作者
Zrník, J
Strunz, P
Hornák, P
Vrchovinsky, V
Wiedenmann, A
机构
[1] Tech Univ Kosice, Kosice 04200, Slovakia
[2] Hahn Meitner Inst Berlin GmbH, HMI, D-14109 Berlin, Germany
[3] Inst Nucl Phys, Rez 25068, Prague, Czech Republic
来源
关键词
PACS: 81.40.L; 62.20Hg; 61.12.E;
D O I
10.1007/s003390101208
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The SANS experiment was a crucial part of a broader investigation of the long-time structural stability of the polycrystalline Ni-base superalloy and its effect on the subsequent creep characteristics. The results of the creep tests have shown that a long isothermal exposure at temperatures of 430degreesC and 650degreesC up to 25 000 h changed the deformation ability and creep life of the exposed specimens. While structure analyses (TEM) showed no evidence of a morphological and/or dimensional gamma' change, the SANS technique was able to reveal significant changes of the morphology of gamma' precipitates already after the shortest applied thermal exposition, 2000 h. The resulting size distributions, distance distributions, mean sizes and mean distances between the precipitates made evident that both the size and the distance increase in the bulk of the alloy with increasing thermal exposure even at such relatively low temperatures.
引用
收藏
页码:S1155 / S1157
页数:3
相关论文
共 50 条
  • [31] A model describing microstructural evolution for Ni-base superalloy forgings during the cogging process
    Dandre, CA
    Roberts, SM
    Evans, RW
    Reed, RC
    JOURNAL DE PHYSIQUE IV, 1999, 9 (P9): : 33 - 42
  • [32] Densification and microstructural evolution during co-sintering of Ni-base superalloy powders
    Simchi, A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (08): : 2549 - 2557
  • [33] In situ SANS investigation of precipitate microstructure at elevated temperatures in Re-rich Ni-base superalloy
    D. Mukherji
    P. Strunz
    R. Gilles
    J. Rösler
    A. Wiedenmann
    H. Fuess
    Applied Physics A, 2002, 74 : s1074 - s1076
  • [34] In situ SANS investigation of precipitate microstructure at elevated temperatures in Re-rich Ni-base superalloy
    Mukherji, D
    Strunz, P
    Gilles, R
    Rösler, J
    Wiedenmann, A
    Fuess, H
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2002, 74 (Suppl 1): : S1074 - S1076
  • [35] Microstructure of Long-Term Aged IN617 Ni-Base Superalloy
    Quanyan Wu
    Hyojin Song
    Robert W. Swindeman
    John P. Shingledecker
    Vijay K. Vasudevan
    Metallurgical and Materials Transactions A, 2008, 39 : 2569 - 2585
  • [36] Fatigue properties of Ni-base superalloy in long life region at elevated temperature
    Kawagoishi, Norio
    Chen, Qiang
    Otsubo, Ken-Ichi
    Yan, Nu
    Kondo, Eiji
    Wang, Qingyuan
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2002, 68 (08): : 1192 - 1197
  • [37] Microstructural Characterization of Ni-Base Superalloy As-Cast Single Crystal (CMSX-4)
    M. F. Moreira
    L. B. Fantin
    C. R. F. Azevedo
    International Journal of Metalcasting, 2021, 15 : 676 - 691
  • [38] MICROSTRUCTURAL CHARACTERIZATION OF Ni-BASE SUPERALLOY AS-CAST SINGLE CRYSTAL (CMSX-4)
    Moreira, M. F.
    Fantin, L. B.
    Azevedo, C. R. F.
    INTERNATIONAL JOURNAL OF METALCASTING, 2021, 15 (02) : 676 - 691
  • [39] Fatigue life evaluation of a single crystal Ni-base superalloy, accompanying with change of microstructural morphology
    Sakaguchi, Motoki
    Okazaki, Masakazu
    INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (9-11) : 1959 - 1965
  • [40] Predicting the microstructural evolution in a multi-layered corrosion resistant coating on a Ni-base superalloy
    Pillai, R.
    Taylor, M. P.
    Galiullin, T.
    Chyrkin, A.
    Wessel, E.
    Evans, H.
    Quadakkers, W. J.
    MATERIALS AT HIGH TEMPERATURES, 2018, 35 (1-3) : 78 - 88