The effects of Si incorporation on the thermal and tribological properties of DLC films deposited by PBII&D with bipolar pulses

In the present study, the thermal stability and tribological properties of silicon-incorporated diamond-like carbon (DLC) films were investigated. The DLC films were deposited using a bipolar-type plasma based ion implantation and deposition (PBII&D) technique, and the Si contents in the films were varied from 0 to 29 at.%. The deposited DLC films were annealed at 500 degrees C for 30 min in ambient air. The structure and mechanical properties of the Si-DLC films with a high Si content (>= 21 at.%) were not affected by the thermal annealing. The 21 at.% Si-DLC film annealed at 500 degrees C shows low wear as well as low friction, whereas the 29 at.% Si-DLC film exhibited a high friction due to the creation of cracks on the worn surface related to the SiC-like nature. The 11 at.% Si-DLC film annealed at 500 degrees C shows the lowest friction coefficient at the cost of significant wear in the graphitized film. The formation of a thick silicon oxide layer on the Si-DLC film could be favorable for low friction and wear. (c) 2007 Elsevier B.V. All rights reserved.