Volumetric flame synthesis of one-dimensional molybdenum oxide nanostructures

A laminar counter-flow diffusion flame formed with methane/acetylene and oxygen enriched-air was used for the controlled synthesis of 1-D molybdenum oxide nanostructures directly in the gas phase. Raw material was introduced into the oxidizer side of the flame in the form of solid molybdenum wires with similar to 99% purity. Molybdenum oxide vapors formed in the gas phase were transported by the gas flow in the flame environment possessing strong thermal and chemical gradients. The generated nanostructures were collected thermophoretically from the flame volume. Essential morphological variations of generated nanomaterials were observed depending on sampling position within the flame volume and probe parameters. The mechanism behind the synthesis of the spherical and 1-D nanoforms is analyzed and modeled numerically. The nanorod growth model involves monomer transport, nucleation and growth. The monomer formation is through the oxidation and vaporization of the probe material. The nucleation model is based on the classical nucleation theory. The model predicts the trajectory and growth of the formed nuclei as they are transported in the flame volume. It is considered that the ends of the cylindrical 1-D nanorods grow by the phenomenon of rough growth while the lateral faces exhibit layered growth. The growth model also considers the contribution of the monomers diffusing on the nanoparticle surface as well as the effect of the atoms impinging directly onto the growth sites and compares their relative contributions. The model qualitatively predicts the variation of aspect ratio of the formed nanomaterials with increase of monomer concentration as observed in the experiments. (C) 2014 The Combustion Institute. Published by Elsevier Inc. All rights reserved.