'In-situ' weld-alloying/laser beam welding of SiCp/6061Al MMC

被引：59
|
作者：
Wang, HM [1 ]
Chen, YL [1 ]
Yu, LG [1 ]
机构：
[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Sci & Engn, Lab Laser Mat Proc & Surface Engn, Beijing 100083, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2000年 / 293卷 / 1-2期
基金：
中国国家自然科学基金;
关键词：
SiCp/Al MMCs; laser beam welding; in-situ weld-alloying; aluminum carbide; titanium carbide; titanium silicide;
D O I：
10.1016/S0921-5093(00)01249-1
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this paper, 'in-situ' weld-alloying/laser beam welding with titanium as alloying element is utilized to join SiCp/6061Al MMC in order to prevent the formation of the needle-like harmful Al4C3 phases in the weld. Microstructure of the weld is characterized as functions of alloying content and processing parameters. Results show that the needle-like harmful aluminum carbides are completely eliminated. A central fusion weld joint reinforced by TiC, Ti5Si3 and Al3Ti is produced by 'in-situ' weld-alloying/laser beam welding of SiCp/6061Al MMC, while some large pores are formed in the partly melted zone. (C) 2000 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：1 / 6
页数：6
相关论文
共 50 条
  • [31] Study of the interfacial reaction of SiC-Al in 6061Al reinforced with SiC whisker at laser beam
    Liu, LM
    Zhu, ML
    Xu, DS
    Wang, T
    COMPOSITE INTERFACES, 2002, 9 (02) : 135 - 142
  • [32] In-situ nanoscale Al2O3 spherical particle formation in Al-matrix of Al–Si/SiCP MMC foil by laser pulsing
    Mahanty S.
    Gouthama
    Surface Engineering and Applied Electrochemistry, 2016, 52 (5) : 415 - 419
  • [33] Effect of laser surface melting on nanoparticles dispersion and tensile properties of in-situ nano-ZrB2p/6061Al composite
    Zeng, Yida
    Lin, Bo
    Fang, Ping
    Liu, Zemin
    Guo, Zhenghua
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 4025 - 4033
  • [34] In-situ measurement of weld quality during MAG welding using laser ultrasonic
    Otaki S.
    Matsuida T.
    Nomura K.
    Imura F.
    Kita R.
    Asai S.
    Welding International, 2019, 33 (10-12) : 450 - 459
  • [35] In-situ measurement of weld quality during MAG welding using laser ultrasonic
    Otaki, Satoshi
    Matsuida, Taketo
    Nomura, Kazufumi
    Imura, Fumiya
    Kita, Ryosuke
    Asai, Satoru
    2020, Japan Welding Society (38): : 11 - 18
  • [36] Effects of Laser Beam Swing Parameters on Microstructure and Properties of SiCp/Al Composites by Laser Welding
    Xiong, Cheng
    Pan, Peng
    Chen, Shuangjian
    Tao, Wu
    Wang, Yanjun
    Lin, Zhe
    Zhu, Zhengqiang
    Yang, Shanglu
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2025, 52 (04):
  • [37] Investigation on the machinability of SiCp/Al composite by in-situ laser assisted diamond cutting
    Wang, Mao
    Zheng, Zhengding
    Wu, Zhongpu
    Zhang, Jianguo
    Chen, Xiao
    Xiao, Junfeng
    Xu, Jianfeng
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 318
  • [38] Development of in situ MMC joint using friction stir spot welding of Al6061-T6
    Neeru Chaudhary
    Sarbjit Singh
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 3633 - 3646
  • [39] Development of in situ MMC joint using friction stir spot welding of Al6061-T6
    Chaudhary, Neeru
    Singh, Sarbjit
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (9-10): : 3633 - 3646
  • [40] TEM IN-SITU STUDY OF ISOTHERMALLY INDUCED CRACKING IN THE NEAR-INTERFACE REGION OF AN SICW/6061AL COMPOSITE
    LIU, J
    WANG, DZ
    YAO, CK
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1995, 14 (03) : 201 - 203
12345