Friction properties of composite materials of the system TiN-AlN. II. Effect of oxide films on friction and wear of a ceramic material steel system

被引：1

作者：

Mosina, TV ^{[1
]}

Panasyuk, AD ^{[1
]}

Grigor'ev, ON ^{[1
]}

Yuga, AI ^{[1
]}

机构：

[1] Natl Acad Sci Ukraine, Inst Problems Mat Sci, Kiev, Ukraine

来源：

POWDER METALLURGY AND METAL CERAMICS | 2000年 / 39卷 / 1-2期

关键词：

ceramics; friction pair; tribological properties; composite material;

D O I：

10.1007/BF02677451

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Friction and wear are studied for materials of the system TiN - AIN preliminary oxidized at 800-1100 OC. It was established that thin oxide films containing Al2TiO5 and alpha-Al2O3, that promote a decrease in frictional wear, form on the surface of composite materials of the system TiN - AIN. Our assumptions are confirmed that the improvement in tribological properties of TiN - AlN composites is caused by forming oxide screening lavers that prevent direct contact between the ceramics and steel counter-body. At high rates (V = 16 m/sec) and pressure (P = 2.0 MPa) the oxide films form more rapidly.

引用

页码：105 / 108

页数：4

共 50 条

[41] Dependence of optical properties of composite materials with nanosize oxide coatings on the properties of film-forming sols: II. Effect of the sol component concentration
Shemanin, V. G.
Atkarskaya, A. B.
TECHNICAL PHYSICS, 2015, 60 (07) : 1051 - 1055
[42] Dependence of optical properties of composite materials with nanosize oxide coatings on the properties of film-forming sols: II. Effect of the sol component concentration
V. G. Shemanin
A. B. Atkarskaya
Technical Physics, 2015, 60 : 1051 - 1055
[43] Effect of ceramic reinforcement particle on mechanical and tribological properties of sintered copper-based brake composite friction materials using pin-on-disc tribometer
Petchiappan, Raja
Ramkumar, P.
JURNAL TRIBOLOGI, 2023, 39 : 117 - 133
[44] High-temperature corrosion of AlN-based composite ceramic in air and in combustion products of commercial fuel.: II.: Corrosion of ceramic composites in the AlN-SiC-TiB2 system in air and in combustion products of kerosene and diesel fuel
Lavrenko, VA
Baxter, DJ
Panasyuk, AD
Desmaison-Brut, M
Fenard, E
Pavlikov, VN
POWDER METALLURGY AND METAL CERAMICS, 2004, 43 (5-6) : 295 - 304
[45] Structure and electrophysical properties of hot-compacted ceramic materials in the Si3N4 system II. Electroconductivity of materials in the frames of the theory of heterophase systems conductivity
Kasiyanenko, A.A.
Shipilova, L.A.
Gervits, E.I.
Poroshkovaya Metallurgiya, 1992, (08): : 80 - 85
[46] Electrical, optical and material properties of ZnO-doped indium-tin oxide films prepared using radio frequency magnetron cosputtering system at room temperature
Liu, Day-Shan
Lin, Chun-Hsing
Huang, Bing-Wen
Wu, Chun-Ching
Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 2006, 45 (4 B): : 3526 - 3530
[47] Electrical, optical and material properties of ZnO-doped indium-tin oxide films prepared using radio frequency magnetron cosputtering system at room temperature
Liu, DS
Lin, CH
Huang, BW
Wu, CC
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2006, 45 (4B): : 3526 - 3530
[48] Influence of CaO-SiO2-Al2O3 Ternary Oxide System on the Reduction Behavior of Carbon Composite Pellet: Part II. Morphological Properties
Hyunsik Park
Veena Sahajwalla
Metallurgical and Materials Transactions B, 2013, 44 : 1390 - 1397
[49] Influence of CaO-SiO2-Al2O3 Ternary Oxide System on the Reduction Behavior of Carbon Composite Pellet: Part II. Morphological Properties
Park, Hyunsik
Sahajwalla, Veena
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2013, 44 (06): : 1390 - 1397
[50] The effect of post-sintering heat treatment on the properties of SiC-LaAlO3-chromium carbide ceramic material fabricated by a liquid phase sintering:: II.: Effect of heat-treatment at 1500°C on properties of SiC-LaAlO3-chromium carbide ceramic materials
Kirianov, A
Yamaguchi, A
CERAMICS INTERNATIONAL, 2000, 26 (07) : 763 - 768

← 1 2 3 4 5 →