The effects of tool surface quality in micro-injection moulding

被引：88

作者：

Griffiths, C. A. ^{[1
]}

Dimov, S. S. ^{[1
]}

Brousseau, E. B. ^{[1
]}

Hoyle, R. T. ^{[1
]}

机构：

[1] Univ Cardiff Wales, Mfg Engn Ctr, Cardiff CF25 3AA, Wales

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2007年 / 189卷 / 1-3期

基金：

英国工程与自然科学研究理事会;

关键词：

micro-injection moulding; part quality; surface finish;

D O I：

10.1016/j.jmatprotec.2007.02.022

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Micro-injection moulding is one of the key technologies for micro-manufacture and is widely used as a cost effective replication method for mass production. The capabilities of this replication technology have to be studied systematically in order to determine the process constraints. In this research, the factors affecting the flow behaviour are discussed. A special attention is paid to the interaction between the melt flow and the tool surface. Three different polymer materials, PP, ABS and PC, were employed to perform moulding tests using cavities with the same geometry but different surface finish. The effects of the tool surface roughness on the melt flow length and part quality were investigated by varying three process parameters, melt and mould temperature, and injection speed. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：418 / 427

页数：10

共 50 条

[41] Innovative design and simulation study of a mould for rapid temperature control in micro-injection moulding
De Meo, Annarita
De Santis, Felice
Speranza, Vito
Whiteside, Ben
Coates, Phil D.
Pantani, Roberto
[J]. PROCEEDINGS OF PPS-34: THE 34TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY - CONFERENCE PAPERS, 2019, 2065
[42] Manufacturing of an Array of Microneedles in a Steel Insert for Micro-injection Moulding Using Laser Milling
Lacan, F.
Scholz, S. G.
Petkov, P.
Dimov, S. S.
[J]. PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON MULTI-MATERIAL MICRO MANUFACTURE (4M 2011), 2011, : 336 - 339
[43] A MICRO-INJECTION NEEDLE
WORST, J
[J]. NATURE, 1952, 169 (4302) : 631 - 632
[44] EFFECT OF TOOLING SURFACE ROUGHNESS IN MICRO-INJECTION MOLDING
Yoon, Sung-Hwan
Im, Ji-sun
Mead, Joey L.
Xiong, Xugang
Lee, Jun S.
Cha, Nam-Goo
Barry, Carol M. F.
[J]. MSEC 2008: PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2008, VOL 2, 2009, : 391 - 398
[45] CONTROVERSIES IN MICRO-INJECTION
NG, SC
BONGSO, TA
LIOW, SL
EDIRISINGHE, R
TOK, V
RATNAM, SS
[J]. JOURNAL OF ASSISTED REPRODUCTION AND GENETICS, 1992, 9 (03) : 186 - 189
[46] A method for micro-injection
Gregory, ER
[J]. ANATOMICAL RECORD, 1916, 11 (01): : 29 - 30
[47] Effect of LBM and large-area EBM finishing on micro-injection moulding surfaces
António Selada
Ana Manaia
Maria Teresa Vieira
António Sérgio Pouzada
[J]. The International Journal of Advanced Manufacturing Technology, 2011, 52 : 171 - 182
[48] Effect of LBM and large-area EBM finishing on micro-injection moulding surfaces
Selada, Antonio
Manaia, Ana
Vieira, Maria Teresa
Pouzada, Antonio Sergio
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (1-4): : 171 - 182
[49] Simulation of the micro-injection moulding process: effect of the thermo-rheological status on the morphology
Nguyen-Chung, T.
Loeser, C.
Juettner, G.
Pham, T.
Obadal, M.
Gehde, M.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2011, 225 (E4) : 224 - 238
[50] A MICRO-INJECTION SYSTEM
WORST, J
[J]. QUARTERLY JOURNAL OF MICROSCOPICAL SCIENCE, 1954, 95 (04): : 469 - 472

← 1 2 3 4 5 →