The effects of laser reflow conditions on the formation of intermetallic compounds at Sn3.0Ag0.5Cu solder/Cu joint interface

被引：1
|
作者：
Liu, W [1 ]
Wang, CQ [1 ]
Li, MY [1 ]
Tian, YH [1 ]
Guan, JW [1 ]
机构：
[1] Harbin Inst Technol, Natl Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China
来源：
PROCEEDINGS OF THE SIXTH IEEE CPMT CONFERENCE ON HIGH DENSITY MICROSYSTEM DESIGN AND PACKAGING AND COMPONENT FAILURE ANALYSIS (HDP'04) | 2004年
关键词：
D O I：
10.1109/HPD.2004.1346676
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents intermetallic compounds formation at the interface between the Sn3.0Ag0.5Cu solder and Cu pad during a first laser reflow, and then followed by a second hot air reflow processes. Cu3Sn was observed at the laser reflow solder joints, and its morphology was strongly dependent on the laser reflow power and heating time applied. The compound was formed in the first laser reflow process also changed after the secondary hot air reflow process. Cu6Sn5 was formed in the joint after the secondary hot air reflow process, and it was found that the morphology of intermetallic compound formed by the second hot air reflow were also affected by the conditions of the first laser reflow.
引用
收藏
页码：70 / 73
页数：4
相关论文
共 50 条
  • [41] Effect of current on the growth of intermetallic compounds in Sn-3.0Ag-0.5Cu solder joints
    Li, Bofeng
    Wang, Jundong
    Yao, Yao
    2023 24TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2023,
  • [42] Electromigration Effects on Intermetallic Compound Layer Growth in Sn-3.0Ag-0.5Cu-XCo Solder Joint
    Ma Limin
    Xu Guangchen
    Sun Jia
    Guo Fu
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 438 - 442
  • [43] Kinetics of Intermetallic Compound Formation at the Interface Between Sn-3.0Ag-0.5Cu Solder and Cu-Zn Alloy Substrates
    Young Min Kim
    Hee-Ra Roh
    Sungtae Kim
    Young-Ho Kim
    Journal of Electronic Materials, 2010, 39 : 2504 - 2512
  • [44] Kinetics of Intermetallic Compound Formation at the Interface Between Sn-3.0Ag-0.5Cu Solder and Cu-Zn Alloy Substrates
    Kim, Young Min
    Roh, Hee-Ra
    Kim, Sungtae
    Kim, Young-Ho
    JOURNAL OF ELECTRONIC MATERIALS, 2010, 39 (12) : 2504 - 2512
  • [45] Effect of Rapid Thermal Fatigue on Microstructure and Properties of Sn3.0Ag0.5Cu/Cu Solder Bumps
    Tian, Mizhe
    Gan, Guisheng
    Cao, Huadong
    Yang, Donghua
    Jiang, Liujie
    Xia, Daquan
    Sun, Pengfei
    Liu, Xin
    Wu, Yiping
    2020 21ST INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2020,
  • [46] Undercooling Behavior and Intermetallic Compound Coalescence in Microscale Sn-3.0Ag-0.5Cu Solder Balls and Sn-3.0Ag-0.5Cu/Cu Joints
    Zhou, M. B.
    Ma, X.
    Zhang, X. P.
    JOURNAL OF ELECTRONIC MATERIALS, 2012, 41 (11) : 3169 - 3178
  • [47] Undercooling Behavior and Intermetallic Compound Coalescence in Microscale Sn-3.0Ag-0.5Cu Solder Balls and Sn-3.0Ag-0.5Cu/Cu Joints
    M. B. Zhou
    X. Ma
    X. P. Zhang
    Journal of Electronic Materials, 2012, 41 : 3169 - 3178
  • [48] Solid State Reaction of Sn3.0Ag0.5Cu Solder with Cu(Mn) Under Bump Metallization
    Tseng, Chien-Fu
    Duh, Jenq-Gong
    Tsai, Su-Yueh
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 152 - 155
  • [49] DYNAMIC RECRYSTALLIZATION of Sn3.0Ag0.5Cu Pb-FREE SOLDER ALLOY
    Holdermann, Ken
    Cuddalorepatta, Gayatri
    Dasgupta, Abhijit
    IMECE2008: PROCEEDINGS OF THE INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2008, VOL 6, 2009, : 163 - 169
  • [50] Effects of POSS-Silanol Addition on the Whisker Formation in Sn3.0Ag0.5Cu Pb-Free Solder
    Liu, Sihan
    Ma, Limin
    Shu, Yutian
    Zuo, Yong
    Guo, Fu
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 765 - 768
12345