The effects of laser reflow conditions on the formation of intermetallic compounds at Sn3.0Ag0.5Cu solder/Cu joint interface

被引：1
|
作者：
Liu, W [1 ]
Wang, CQ [1 ]
Li, MY [1 ]
Tian, YH [1 ]
Guan, JW [1 ]
机构：
[1] Harbin Inst Technol, Natl Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China
来源：
PROCEEDINGS OF THE SIXTH IEEE CPMT CONFERENCE ON HIGH DENSITY MICROSYSTEM DESIGN AND PACKAGING AND COMPONENT FAILURE ANALYSIS (HDP'04) | 2004年
关键词：
D O I：
10.1109/HPD.2004.1346676
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents intermetallic compounds formation at the interface between the Sn3.0Ag0.5Cu solder and Cu pad during a first laser reflow, and then followed by a second hot air reflow processes. Cu3Sn was observed at the laser reflow solder joints, and its morphology was strongly dependent on the laser reflow power and heating time applied. The compound was formed in the first laser reflow process also changed after the secondary hot air reflow process. Cu6Sn5 was formed in the joint after the secondary hot air reflow process, and it was found that the morphology of intermetallic compound formed by the second hot air reflow were also affected by the conditions of the first laser reflow.
引用
收藏
页码：70 / 73
页数：4
相关论文
共 50 条
  • [1] The properties of intermetallic compounds at Sn3.0Ag0.5Cu/Cu joint interface
    Shu, X.-F., 1600, Journal of Functional Materials, P.O. Box 1512, Chongqing, 630700, China (44):
  • [2] Size distribution and growth mechanism of interfacial intermetallic compounds in Sn3.0Ag0.5Cu/Cu reflow solder joints
    Yang L.
    Mu G.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2022, 43 (04): : 61 - 67
  • [3] Effect of Reflow Profile Parameters on Shear Performance of Sn3.0Ag0.5Cu/Cu Solder Joint
    Wang, Xin
    Li, Xunping
    Pan, Kailin
    Zhou, Bin
    Jiang, Tingbiao
    PROCEEDINGS OF 2014 10TH INTERNATIONAL CONFERENCE ON RELIABILITY, MAINTAINABILITY AND SAFETY (ICRMS), VOLS I AND II, 2014, : 691 - 693
  • [4] Morphologies and grain orientations of Cu-Sn intermetallic compounds in Sn3.0Ag0.5Cu/Cu solder joints
    Liu, Wei
    Tian, Yanhong
    Wang, Chunqing
    Wang, Xuelin
    Liu, Ruiyang
    MATERIALS LETTERS, 2012, 86 : 157 - 160
  • [5] Size effect of Sn3.0Ag0.5Cu solder joint on intermetallic layer growth
    Wang, Shaobin
    Yao, Yao
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1547 - 1551
  • [6] Effect of thermal cycles on intermetallic compounds of Sn3.0Ag0.5Cu and Cu soldering joint
    Xu, Yuan-Yuan
    Yan, Yan-Fu
    Li, Shuai
    Ge, Ying
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (01): : 93 - 98
  • [7] Investigation of Stress Evolution at the Interface of Cu/Sn3.0Ag0.5Cu/Cu Solder Joint during Electromigration
    He Hongwen
    Zhao Haiyan
    Ma Limin
    Xu Guangchen
    Guo Fu
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 401 - 404
  • [8] Growth Behavior of Intermetallic Compounds in Cu/Sn3.0Ag0.5Cu Solder Joints with Different Rates of Cooling
    Linmei Yang
    Z. F. Zhang
    Journal of Electronic Materials, 2015, 44 : 590 - 596
  • [9] Growth Behavior of Intermetallic Compounds in Cu/Sn3.0Ag0.5Cu Solder Joints with Different Rates of Cooling
    Yang, Linmei
    Zhang, Z. F.
    JOURNAL OF ELECTRONIC MATERIALS, 2015, 44 (01) : 590 - 596
  • [10] Electromigration in Sn3.0Ag0.5Cu flip chip solder joint
    Lu Yu-Dong
    He Xiao-Qi
    En Yun-Fei
    Wang Xin
    Zhuang Zhi-Qiang
    ACTA PHYSICA SINICA, 2009, 58 (03) : 1942 - 1947
12345