Characterisation and modelling of the machinability of ferritic-pearlitic steels in drilling operations

被引：8
|
作者：
Abouridouane, Mustapha [1 ]
Klocke, Fritz [1 ]
Doebbeler, Benjamin [1 ]
机构：
[1] Rhein Westfal TH Aachen, Lab Machine Tools & Prod Engn WZL, Chair Mfg Technol, Steinbachstr 19, D-52074 Aachen, Germany
来源：
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) | 2017年 / 58卷
关键词：
FE Modelling; Machinability of FP Steels; Microstructure; Drilling Operations; Constitutive material law; SULFIDE INCLUSIONS; CUTTING-TOOL; MICROSTRUCTURE; WEAR;
D O I：
10.1016/j.procir.2017.03.197
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The machinability of work materials strongly affects the chip formation mechanics, tool wear behaviour and the process performance. Therefore, the characterisation and modelling of the machinability are a very important issues. This paper deals with experimental and simulative investigations on the machinability of ferritic-pearlitic steels with different microstructures by twist drilling. The machinability of the investigated steels is evaluated and classified by means of the weighted point evaluation method. To predict four aspects of the machinability (thermomechanical load, feed force, cutting torque, and chip form), a 3D FE computation model is developed and successfully validated. (C) 2017 The Authors. Published by Elsevier B.V.
引用
收藏
页码：79 / 84
页数：6
相关论文
共 50 条
  • [21] Cyclic endurance of ferritic-pearlitic grade steels in thermal cycling at reduced temperatures
    Zorin, E.E.
    Chezhin, S.P.
    Chemical and Petroleum Engineering, 1988, 24 (11-12) : 612 - 613
  • [22] Effect of Ti and S Content on the Properties and Machinability of Low-Carbon Ferritic-Pearlitic Steel
    Arh, Bostjan
    Tehovnik, Franc
    Vode, Franci
    Podgornik, Bojan
    METALS, 2024, 14 (09)
  • [23] BRITTLE-FRACTURE INITIATION AND PROPAGATION-ARREST CHARACTERISTICS IN FERRITIC-PEARLITIC STEELS
    OHMORI, Y
    IWANAGA, H
    KAWAGUCHI, Y
    TERASAKI, F
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1976, 16 (07) : 388 - 395
  • [24] The Notch Master Curve: A proposal of Master Curve for ferritic-pearlitic steels in notched conditions
    Cicero, S.
    Madrazo, V.
    Garcia, T.
    ENGINEERING FAILURE ANALYSIS, 2014, 42 : 178 - 196
  • [25] Fatigue crack growth behavior in ferritic-pearlitic steels with networked and distributed pearlite structures
    Korda, Akhmad A.
    Miyashita, Y.
    Mutoh, Y.
    Sadasue, T.
    INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (06) : 1140 - 1148
  • [26] Effects of microstructure on the dynamic strain aging of ferritic-pearlitic steels at high strain rates
    Mardoukhi, Ahmad
    Ramo, Jari
    Vuoristo, Taina
    Roth, Amandine
    Hokka, Mikko
    Kuokkala, Veli-Tapani
    12TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING (DYMAT 2018), 2018, 183
  • [27] INFLUENCE OF MN AND SI CONTENTS ON STRUCTURE AND MECHANICAL-PROPERTIES OF FERRITIC-PEARLITIC HSLA STEELS
    RICHTER, J
    GUTH, A
    KOTHE, A
    BACKMANN, G
    STEEL RESEARCH, 1993, 64 (05): : 267 - 274
  • [28] Effect of Grain Size on the Toughness of Ferritic-Pearlitic Mass-Produced Structural Steels.
    Boehm, Dieter
    Heider, Franz
    Bomski, Klaus Peter
    Neue Huette, 1975, 20 (01): : 42 - 45
  • [29] Structural Transformations of Carbon Ferritic-Pearlitic Steels under Conditions of High-Speed Loading
    Anatoliy, Bataev
    Ivan, Bataev
    Nikulina, Aelita Aleksandrovna
    Igorevich, Popelyukh Albert
    Igor, Balagansky
    Natalya, Plotnikova
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2019, 21 (03): : 115 - 128
  • [30] Damaging micromechanisms in ferritic-pearlitic ductile cast irons
    Iacoviello, F.
    Di Bartolomeo, O.
    Di Cocco, V.
    Piacente, V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 478 (1-2): : 181 - 186
12345