Effect of load upon the abrasive wear of silica-filled epoxy resin composites

被引：5
|
作者：
Koh, Sung Wi [1 ]
Kim, Hyung Jin [2 ]
Kim, Jae Dong [3 ]
Kim, Byung Tak [1 ]
Hwang, Sun Oug [2 ]
Choi, Woo Seok [1 ]
机构：
[1] Pukyong Natl Univ, Sch Mech Engn, San 100,Yongdang Dong, Pusan 608739, South Korea
[2] Gyeongsang Natl Univ, Sch Mech & Aerospace Engn, Tongyeong 650 160, South Korea
[3] Gyeongsang Natl Univ, Inst Marine Ind, Tongyeong 650 160, South Korea
来源：
ECO-MATERIALS PROCESSING AND DESIGN VIII | 2007年 / 544-545卷
关键词：
silica-filled composites; wear characteristics; particle size; load effect; sliding distance; worn surface;
D O I：
10.4028/www.scientific.net/MSF.544-545.255
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
In the present study, the influences of load on the abrasive wear properties of silica-filled epoxy resin composites were investigated at ambient temperature. The friction coefficient, wear rate and specific wear rate against SiC abrasive paper were determined experimentally. The sliding wear tests of the materials demonstrated that the friction coefficient and the wear rate of silica filled epoxy composites were lower than those of the pure epoxy. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on diameter of the silica particle for all these composites. The friction coefficient and wear rate were raised substantially with an increase in applied load.
引用
下载
收藏
页码：255 / +
页数：2
相关论文
共 50 条
  • [31] Photopolymerization of silica-filled composites: Encapsulants for microelectronic devices.
    Scranton, AB
    Baikerikar, KK
    Sipani, V
    Coretsopoulos, CN
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2001, 222 : U329 - U329
  • [32] Silica-filled methacrylic composites with extremely high compressive strength
    Sandomierski, Mariusz
    Buchwald, Zuzanna
    Buchwald, Tomasz
    Voelkel, Adam
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2021, 116
  • [33] Abrasive and sliding wear of resin composites for dental restorations
    Souza, Julio C. M.
    Bentes, Ana C.
    Reis, Kelly
    Gavinha, Sandra
    Buciumeanu, Mihaela
    Henriques, Bruno
    Silva, Filipe S.
    Comes, Jose R.
    TRIBOLOGY INTERNATIONAL, 2016, 102 : 154 - 160
  • [34] Wear Behaviour of Epoxy Resin Filled with Hard Powders
    Formisano, A.
    Boccarusso, L.
    Minutolo, F. Capece
    Carrino, L.
    Durante, M.
    Langella, A.
    PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
  • [35] Optimization of abrasive wear behaviour of halloysite nanotubes filled carbon fabric reinforced epoxy hybrid composites
    Muralidhara, B.
    Babu, S. P. Kumaresh
    Hemanth, G.
    Suresha, B.
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2020, 8 (04)
  • [36] Mechanical and three-body abrasive wear behavior of SiC filled glass-epoxy composites
    Suresha, B.
    Chandramohan, G.
    Kishore
    Sampathkumaran, P.
    Seetharamu, S.
    POLYMER COMPOSITES, 2008, 29 (09) : 1020 - 1025
  • [37] Erosive wear characteristics of E-glass fiber reinforced silica fume and zinc oxide-filled epoxy resin composites
    Ozturk, Bulent
    Gedikli, Hasan
    Kilicarslan, Yavuz S.
    POLYMER COMPOSITES, 2020, 41 (01) : 326 - 337
  • [38] FAILURE OF BRITTLE POLYMERS BY SLOW CRACK GROWTH .3. EFFECT OF COMPOSITION UPON FRACTURE OF SILICA PARTICLE-FILLED EPOXY-RESIN COMPOSITES
    YOUNG, RJ
    BEAUMONT, PWR
    JOURNAL OF MATERIALS SCIENCE, 1977, 12 (04) : 684 - 692
  • [39] Effect of ethanol as diluent on the properties of mineral silica filled epoxy composites
    Teh, P. L.
    Mariatti, M.
    Akil, H. M.
    Seetharamu, K. N.
    Wagiman, A. N. R.
    Beh, K. S.
    JOURNAL OF COMPOSITE MATERIALS, 2008, 42 (02) : 129 - 142
  • [40] Effect of curing agent on the properties of mineral silica filled epoxy composites
    Teh, P. L.
    Mariatti, M.
    Wagiman, A. N. R.
    Beh, K. S.
    POLYMER COMPOSITES, 2008, 29 (01) : 27 - 36
12345