Effect of load upon the abrasive wear of silica-filled epoxy resin composites

被引：5

作者：

Koh, Sung Wi ^{[1
]}

Kim, Hyung Jin ^{[2
]}

Kim, Jae Dong ^{[3
]}

Kim, Byung Tak ^{[1
]}

Hwang, Sun Oug ^{[2
]}

Choi, Woo Seok ^{[1
]}

机构：

[1] Pukyong Natl Univ, Sch Mech Engn, San 100,Yongdang Dong, Pusan 608739, South Korea

[2] Gyeongsang Natl Univ, Sch Mech & Aerospace Engn, Tongyeong 650 160, South Korea

[3] Gyeongsang Natl Univ, Inst Marine Ind, Tongyeong 650 160, South Korea

来源：

ECO-MATERIALS PROCESSING AND DESIGN VIII | 2007年 / 544-545卷

关键词：

silica-filled composites; wear characteristics; particle size; load effect; sliding distance; worn surface;

D O I：

10.4028/www.scientific.net/MSF.544-545.255

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

In the present study, the influences of load on the abrasive wear properties of silica-filled epoxy resin composites were investigated at ambient temperature. The friction coefficient, wear rate and specific wear rate against SiC abrasive paper were determined experimentally. The sliding wear tests of the materials demonstrated that the friction coefficient and the wear rate of silica filled epoxy composites were lower than those of the pure epoxy. The cumulative wear volume tended to increase nonlinearly with increase of sliding distance and depended on diameter of the silica particle for all these composites. The friction coefficient and wear rate were raised substantially with an increase in applied load.

引用

下载

页码：255 / +

页数：2

共 50 条

[1] ABRASIVE WEAR OF STEELS AGAINST SILICA-FILLED EPOXY-RESINS UNDER COMBINED ROLLING AND SLIDING MOTION
MOURITZ, AP
HUTCHINGS, IM
TRIBOLOGY INTERNATIONAL, 1993, 26 (01) : 41 - 47
[2] Effect of oligomeric resin on silica-filled rubber compound
Chen, Ya-Chin
Liu, Yu-Tsen
Lo, Fang-Yen
Zheng, Zhao-Hua
Hsieh, Chih-Chen
Dai, Chi-An
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2017, 253
[3] EXAMINATION OF THE PROCESSES OF DEFORMATION AND FRACTURE IN A SILICA-FILLED EPOXY-RESIN
CANTWELL, WJ
SMITH, JW
KAUSCH, HH
KAISER, T
JOURNAL OF MATERIALS SCIENCE, 1990, 25 (1B) : 633 - 648
[4] Abrasive wear of epoxy composites filled by abrasive particles and reinforced by polyamide fibres
Mohamed, M. K.
Abdel-Jaber, G. T.
Ali, W. Y.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2014, 45 (02) : 123 - 129
[5] FRACTURE-TOUGHNESS AND FAILURE MECHANISMS IN SILICA-FILLED EPOXY-RESIN COMPOSITES - EFFECTS OF TEMPERATURE AND LOADING RATE
KOH, SW
KIM, JK
MAI, YW
POLYMER, 1993, 34 (16) : 3446 - 3455
[6] Effect of the size of the reinforcement phased on the properties of silica-filled composites
Kim, Hyung Jin
Koh, Sung Wi
Kim, Jae Dong
Kim, Byung Tak
ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 267 - +
[7] Wear characteristic of epoxy resin filled with crushed-silica particles
Kanchanomai, C.
Noraphaiphipaksa, N.
Mutoh, Y.
COMPOSITES PART B-ENGINEERING, 2011, 42 (06) : 1446 - 1452
[8] THE EFFECT OF SILICA SURFACE MODIFICATION ON THE DIELECTRIC-PROPERTIES OF SILICA-FILLED EPOXY COMPOUNDS
MYSLINSKI, P
LAZOWSKI, Z
MATERIALS CHEMISTRY AND PHYSICS, 1993, 33 (1-2) : 139 - 144
[9] Tribological performance of epoxy resin filled by abrasive
Khashaba, MI
Ali, WY
METALL, 1999, 53 (12): : 698 - 701
[10] Effects of particle shape, size and interfacial adhesion on the fracture strength of silica-filled epoxy resin
Nakamura, Y
Okabe, S
Iida, T
POLYMERS & POLYMER COMPOSITES, 1999, 7 (03): : 177 - 186

← 1 2 3 4 5 →