Study on the fully mechanized longwall face working condition in China colliery

被引:0
|
作者
Jiang, XY [1 ]
Yaoshe, MDX [1 ]
机构
[1] China Univ Min & Technol, Dept Min Engn, Xuzhou, Jiangsu, Peoples R China
来源
MINE PLANNING AND EQUIPMENT SECTION 1997 | 1997年
关键词
D O I
暂无
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
At present, the coal production of the fully mechanized longwall face accounts for more than 40 percent of the whole amount in China. In order to improve the working condition of the fully mechanized longwall face, the investigation started in February, 1994. Because the coal product is a systematic engineering, and the fully mechanized longwall face working condition can be influenced by lots of factors, the investigation took place from Jixi mining administration which lies in the northern end of China to Pingdingshan mining administration, the biggest in the southern part of China. From the above administrations, 13 typical fully mechanized longwall faces were chosen, 580 coal working shifts were measured, and more than 20,000 data were obtained. This investigation is the biggest one in recent two decades for the fully mechanized longwall face. The paper provided the result of the investigation and proposed some methods and directions for improving the working condition of the fully mechanized face.
引用
收藏
页码:243 / 248
页数:6
相关论文
共 50 条
  • [41] The Comprehensive Identification of Roof Risk in a Fully Mechanized Working Face Using the Cloud Model
    Xiong, Yu
    Kong, Dezhong
    Cheng, Zhanbo
    Wu, Guiyi
    Zhang, Qi
    MATHEMATICS, 2021, 9 (17)
  • [42] Assessment of excavation damage and spalling potential at a mechanized longwall face: a numerical modeling study
    B. Behera
    A. Yadav
    G. S. P. Singh
    S. K. Sharma
    Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2021, 7
  • [43] Microseismic Monitoring to Study Strata Behaviour and to Predict Rockfalls on a Longwall Face at Rajendra Colliery in India
    Sivakumar, C.
    Srinivasan, C.
    Gupta, R. N.
    RASIM6: CONTROLLING SEISMIC RISK, 2005, : 135 - 144
  • [44] Research on the optimal design of roadway support for fully mechanized coal seam working face
    Liang, Qiuhui
    Zhang, Baoliang
    2024 3RD WORKSHOP ON MATERIAL SCIENCE, MODELLING, ENGINEERING, AND APPLICATIONS IN VIBRATION ENGINEERING, MVE 2024, 2024, 2790
  • [45] The feature of support resistance in fully mechanized top-coal caving working face
    Li, HM
    Zhou, Y
    Jian, RL
    PROCEEDINGS IN MINING SCIENCE AND SAFETY TECHNOLOGY, 2002, : 134 - 140
  • [46] Assessment of excavation damage and spalling potential at a mechanized longwall face: a numerical modeling study
    Behera, B.
    Yadav, A.
    Singh, G. S. P.
    Sharma, S. K.
    GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES, 2021, 7 (04)
  • [47] Influence of main roof thickness-span ratio on the initial cracking induced instability in fully mechanized longwall face
    Zhao Y.
    Wang X.
    Zhou J.
    Li Q.
    Zhang C.
    Meitan Xuebao/Journal of the China Coal Society, 2019, 44 (01): : 94 - 104
  • [48] Structural Characteristics of the Overlying Strata in a Fully Mechanized Longwall Face with the Low-Position Thick-Hard Roof
    Xinshuai Shi
    Hongwen Jing
    Zhenlong Zhao
    Geotechnical and Geological Engineering, 2020, 38 : 4767 - 4777
  • [49] Structural Characteristics of the Overlying Strata in a Fully Mechanized Longwall Face with the Low-Position Thick-Hard Roof
    Shi, Xinshuai
    Jing, Hongwen
    Zhao, Zhenlong
    GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2020, 38 (05) : 4767 - 4777
  • [50] Height Development Characteristics of Water-Conducting Fracture Zone in a Fully Mechanized Longwall Face with a Large Panel Width
    Fang, Han
    Zhu, Shuyun
    Zhang, Shengjun
    MINING METALLURGY & EXPLORATION, 2024, : 2407 - 2420