A measurement method of residual stress in quenched steel by neutron diffracation

被引：4
|
作者：
Ju, DY
Mukai, R
Minakawa, N
Morii, Y
Moriai, A
机构：
[1] Saitama Inst Technol, Grad Sch, Dept Mat Sci & Engn, Okabe, Saitama 3690293, Japan
[2] JSNS, Adv Sci Res Ctr, Tokai, Ibaraki 3191195, Japan
来源：
ADVANCES IN NONDESTRUCTIVE EVALUATION, PT 1-3 | 2004年 / 270-273卷
关键词：
neutron diffraction; residual stresses; quenching; phase transformation; gradient distribution; martensite; carbon steel; finite element analysis;
D O I：
10.4028/www.scientific.net/KEM.270-273.139
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An experimental methodology was developed for identification of residual stresses inside quenched steel by neutron diffraction considering gradient distribution of martensite phases. A hybrid method is used by which the residual stress in the quenched steel was measured with neutron diffraction integrated with numerical simulation results of microstructure and phase distribution. A coupled finite element analysis based on metallo-thermo-mechanical theory was carried out to predict the microstructure due to phase transformation during quenching process. The non-strain lattice spacing and elastic modulus were measured with rotating specimen method in tensile test. Then, residual stresses in the (110) plane are measured using the cylinder specimens of quenched S45C and SCr420 steel by the neutron diffraction method. Finally the measured results of XRD, neutron diffraction as well as the calculated values were compared and discussed.
引用
收藏
页码：139 / 146
页数：8
相关论文
共 50 条
  • [31] Residual stress and deformation in UHS quenched steel butt-welded joint
    Hu, Long
    Li, Xixian
    Luo, Wenze
    Li, Suo
    Deng, Dean
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2023, 245
  • [32] Neutron diffraction measurement of the residual stress in the cementite and ferrite phases of cold-drawn steel wires
    VanAcker, K
    Root, J
    VanHoutte, P
    Aernoudt, E
    ACTA MATERIALIA, 1996, 44 (10) : 4039 - 4049
  • [33] Neutron diffraction measurement of residual stress in high strength, highly restrained, thick section steel welds
    Pearce, S. V.
    Linton, V. M.
    PHYSICA B-CONDENSED MATTER, 2006, 385 : 590 - 593
  • [34] In situ neutron diffraction measurement of residual stress relaxation in a welded steel pipe during heat treatment
    Chen, B.
    Skouras, A.
    Wang, Y. Q.
    Kelleher, J. F.
    Zhang, S. Y.
    Smith, D. J.
    Flewitt, P. E. J.
    Pavier, M. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 590 : 374 - 383
  • [35] RESIDUAL STRESS MEASUREMENT IN A STAINLESS STEEL CLAD FERRITIC PLATE USING THE CONTOUR METHOD
    Naveed, Nida
    Hosseinzadeh, Foroogh
    Kowal, Jan
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 5, 2014,
  • [36] Neutron and synchrotron diffraction measurements of residual stress in steel weldments
    Paradowska, Anna M.
    Price, John W. H.
    Ibrahim, Raafat
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 5, 2008, : 243 - 252
  • [37] Measurement of Residual Stress in As-Quenched 7055 Aluminum Plate by Various Methods
    Yan, Hongwei
    Li, Xiwu
    Li, Zhihui
    Li, Ya'nan
    Huang, Shuhui
    Yan, Lizhen
    Zhang, Yong'an
    HIGH PERFORMANCE STRUCTURAL MATERIALS, 2018, : 369 - 376
  • [38] Residual stress measurement and prediction in a hardened steel ring
    Prime, MB
    Prantil, VC
    Rangaswamy, P
    García, FP
    ECRS 5: PROCEEDINGS OF THE FIFTH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2000, 347-3 : 223 - 228
  • [39] Residual stress measurement and prediction in a hardened steel ring
    Prime, M.B.
    Prantil, V.C.
    Rangaswamy, P.
    García, F.P.
    Materials Science Forum, 2000, 347 : 223 - 228
  • [40] Non-destructive measurement of residual stress by neutron diffraction
    Webster, GA
    Wimpory, RC
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) : 395 - 399
12345