The heterogeneous microstructure of heat affect zone and its effect on creep resistance for friction stir joints on 9Cr-1.5 W heat resistant steel

被引：28
|
作者：
Zhang, Chao [1 ]
Cui, Lei [1 ]
Wang, Dongpo [1 ]
Liu, Yongchang [1 ]
Liu, Chenxi [1 ]
Li, Huijun [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, Tianjin Key Lab Adv Joining Technol, Tianjin 300354, Peoples R China
来源：
SCRIPTA MATERIALIA | 2019年 / 158卷
基金：
中国国家自然科学基金;
关键词：
Friction stir welding; Heat resistant steel; Heat affect zone; Heterogeneous microstructure; Creep resistance; FERRITIC-MARTENSITIC STEEL; CRACK-GROWTH BEHAVIOR; MECHANICAL-PROPERTIES; P91; STEEL; WELDING PROCESS; WELDMENTS;
D O I：
10.1016/j.scriptamat.2018.08.028
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The heterogeneity of microstructures in heat affect zone of 9Cr-1.5 W heat resistant steel friction stir welding joint was studied, and its influence on the weld creep property was discussed. The inter critical heat affect zone at the advancing side of the weld is found as the most likely area to be failure during creep, owing to the formation of ferrite grains and lath martensite with low carbon content and the coarsening of M23C6 carbides. The as-welded joint exhibits a good creep resistance of 1173.8 h creep rupture time at 600 degrees C temperature and 200 MPa stress. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：6 / 10
页数：5
相关论文
共 50 条
  • [41] Combined Effect of Co and W on Deformation Resistance of 12Cr Heat-Resistant Steel for USC Steam Turbines
    Huiran Cui
    Feng Sun
    Ke Chen
    Jiansheng Wu
    [J]. Journal of Materials Engineering and Performance, 2011, 20 : 1613 - 1619
  • [42] Combined Effect of Co and W on Deformation Resistance of 12Cr Heat-Resistant Steel for USC Steam Turbines
    Cui, Huiran
    Sun, Feng
    Chen, Ke
    Wu, Jiansheng
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (09) : 1613 - 1619
  • [43] Effect of Tungsten Addition on Microstructure and Creep Properties of Sintered 25Cr-20Ni-1.3Nb Austenitic Heat Resistant Steel
    Kawabata-Ota, Mie
    Nishida, Yasuhiro
    Maekawa, Yuki
    Fukushima, Yoshitaka
    Fujiwara, Hiroshi
    Itoh, Takamoto
    Ameyama, Kei
    [J]. Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 72 (01): : 3 - 9
  • [44] Microstructure characteristics in weld zone of the novel thick 08Cr9W3Co3VNbCuBN heat-resistant steel welded joint by fusion welding
    Fan, Hong-ju
    Liu, Peng
    Wang, Yong-bin
    Guo, Xin-fang
    [J]. PHILOSOPHICAL MAGAZINE LETTERS, 2023, 103 (01)
  • [45] Effect of Heat Input on Microstructure Evolution and Mechanical Properties in the Weld Heat-Affected Zone of 9Cr-2W-VTa Reduced Activation Ferritic-Martensitic Steel for Fusion Reactor
    Joonoh Moon
    Chang-Hoon Lee
    Tae-Ho Lee
    Hyoung Chan Kim
    [J]. Metallurgical and Materials Transactions A, 2015, 46 : 156 - 163
  • [46] Numerical and experimental study of underwater friction stir welding of 1Cr11Ni2W2MoV heat-resistant stainless steel
    Ragab, Mohamed
    Liu, Hong
    Abdel-Aleem, Hamed. A.
    Seleman, Mohamed. M. El-Sayed
    Ahmed, Mohamed. M. Z.
    Mehboob, Ghazanfar
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 130 - 148
  • [47] Effect of Heat Input on Microstructure Evolution and Mechanical Properties in the Weld Heat-Affected Zone of 9Cr-2W-VTa Reduced Activation Ferritic-Martensitic Steel for Fusion Reactor
    Moon, Joonoh
    Lee, Chang-Hoon
    Lee, Tae-Ho
    Kim, Hyoung Chan
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (01): : 156 - 163
  • [48] Effect of Ni content on microstructure and mechanical properties evolutions of 9Cr high Si heat resistant steel deposited metals
    Yu, Tongtong
    Wei, Shitong
    Lu, Shanping
    [J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2024, 209
  • [49] The effect of ultra-fast surface hardening and strengthening on microstructure and mechanical properties of cast (9Cr-3Co-3W) heat-resistant steel
    Saood, Modar
    El-Kashif, Emad El-Din Farouk
    Rabeeh, Bakr Mohamed
    Enan, Lina Abdelkader
    [J]. JOURNAL OF MATERIALS SCIENCE, 2024, 59 (24) : 11110 - 11121
  • [50] Precipitation Behavior in the Heat-Affected Zone of Boron-Added 9Cr-3W-3Co Steel During Post-Weld Heat Treatment and Creep Deformation
    Liu, Yuan
    Tsukamoto, Susumu
    Sawada, Kota
    Tabuchi, Masaaki
    Abe, Fujio
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (05): : 1843 - 1854
12345