INVERSE ANALYSIS OF PLANE STRAIN AND UNIAXIAL COMPRESSION TESTS PERFORMED ON GLEEBLE

被引：0
|
作者：
Aksenov, Sergey [1 ]
Puzino, Yuriy [1 ]
Mazur, Igor [2 ]
机构：
[1] Natl Res Univ, Higher Sch Econ, Moscow, Russia
[2] Lipetsk State Tech Univ, Lipetsk, Russia
来源：
METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2015年
关键词：
PSCT; uniaxial compression; plane strain compression; FEM; inverse analysis; RHEOLOGICAL PARAMETERS; IDENTIFICATION; FRICTION; SIMULATION; REDUCTION; MODEL;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Plane strain and uniaxial compression tests are generally used for characterization of a material constitutive behavior during hot forming. Interpretation of the results obtained by such tests is complicated by flow inhomogeneity occurring in a specimen volume and temperature variations. Inverse analysis is an effective instrument allowing one to take these factors into account and obtain more accurate constitutive equations of a material. In this study the constitutive behavior of HC420LA steel was examined by plane strain and uniaxial compression testing on Gleeble 3800. Finite element simulation of the tests was performed in order to evaluate the flow inhomogeneity and its effect on stress-strain curves obtained as a result of testing. Inverse analysis was used to correct the initial Gleeble data and obtain accurate constitutive equations of the material.
引用
收藏
页码：170 / 175
页数：6
相关论文
共 50 条
  • [31] Fracture of Zircaloy-4 cladding tubes with or without hydride blisters in uniaxial to plane strain conditions with standard and optimized expansion due to compression tests
    de Menibus, Arthur Hellouin
    Auzoux, Quentin
    Mongabure, Philippe
    Macdonald, Vincent
    Le Jolu, Thomas
    Besson, Jacques
    Crepin, Jerome
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 604 : 57 - 66
  • [32] Uniaxial confined compression tests of cementitious materials
    Karinski, Y. S.
    Yankelevsky, D. Z.
    Zhutovsky, S.
    Feldgun, V. R.
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 153 : 247 - 260
  • [33] Uniaxial Compression Tests of Metallic Foams: A Recipe
    Kovacik, J.
    Marsavina, L.
    Adamcikova, A.
    Simancik, F.
    Florek, R.
    Nosko, M.
    Tobolka, P.
    Minar, P.
    Minarikova, N.
    Jerz, J.
    Linul, E.
    PROCEEDINGS OF THE 14TH SYMPOSIUM ON EXPERIMENTAL STRESS ANALYSIS AND MATERIALS TESTING, 2014, 601 : 237 - +
  • [34] Analysis of plane-strain rotational compression of rod by FEM
    Technical Univ of Lublin, Lublin, Poland
    J Mater Process Technol, 1-4 (549-554):
  • [35] Analysis of plane-strain rotational compression of rod by FEM
    Pater, Z
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 60 (1-4) : 549 - 554
  • [36] DEM analysis of the crack propagation in brittle clays under uniaxial compression tests
    Vesga, Luis F.
    Vallejo, Luis E.
    Lobo-Guerrero, Sebastian
    INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2008, 32 (11) : 1405 - 1415
  • [37] Fracture zone formation of cement-treated sand in plane strain compression tests
    Namikawa, T.
    Koseki, J.
    DEFORMATION CHARACTERISTICS OF GEOMATERIALS, VOLS 1 AND 2, 2008, : 371 - 376
  • [38] Plane strain tests on strain softening soils
    Cividini, A
    PROCEEDINGS OF THE FOURTEENTH INTERNATIONAL CONFERENCE ON SOIL MECHANICS AND FOUNDATION ENGINEERING, VOL 1: TECHNICAL PAPERS, 1997, : 255 - 258
  • [39] ELASTOPLASTIC PLANE-STRAIN ANALYSIS FOR A CIRCULAR HOLE IN A UNIAXIAL TENSILE FIELD
    BOWIE, OL
    FREESE, CE
    JOURNAL OF APPLIED MECHANICS, 1971, 38 (03): : 712 - &
  • [40] Crystallographic analysis on the activation of multiple twins in rolled AZ31 Mg alloy sheets during uniaxial and plane strain compression
    Xin, Renlong
    Ding, Changhong
    Guo, Changfa
    Liu, Qing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 652 : 42 - 50
12345