A kinetic model for the oxidation of selenium and tellurium in an industrial kaldo furnace

被引：10
|
作者：
Perez-Tello, M [1 ]
Prieto-Sanchez, MR
Rodriguez-Hoyos, O
Sanchez-Corrales, VM
机构：
[1] Univ Sonora, Dept Ingn Quim & Met, Hermosillo, Sonora, Mexico
[2] Complejo Met La Caridad Nacozari, Grupo Mexico, Garcia, Sonora, Mexico
来源：
JOM | 2004年 / 56卷 / 12期
关键词：
Selenium; Tellurium; Molten Metal; Slag Phase; Extractive Metallurgy;
D O I：
10.1007/s11837-004-0236-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A kinetic model for the oxidation of selenium and tellurium in the molten bath of an industrial Kaldo furnace during the refining step is presented in this article. During plant experiments, samples of the molten metal were collected hourly and chemically analyzed for selenium, tellurium, and silver. Selenium oxidized from the beginning of the refining step, whereas oxidation of tellurium only occurred until the Se/Te mass ratio decreased to a value of 0.55. Good agreement between the model predictions and the experimental data was obtained.
引用
收藏
页码：52 / 54
页数：3
相关论文
共 50 条
  • [21] Lumped kinetic model for catalytic wet oxidation of organic compounds in industrial wastewater
    Dept. of Chem. and Mat. Engineering, University of Alberta, Edmonton, Alta. T6G 2G6, Canada
    AIChE J., 1 (145-150):
  • [22] Lumped kinetic model for catalytic wet oxidation of organic compounds in industrial wastewater
    Zhang, QL
    Chuang, KT
    AICHE JOURNAL, 1999, 45 (01) : 145 - 150
  • [23] Kinetic model for oxygen concentration dependence in the supercritical water oxidation of an industrial wastewater
    Sánchez-Oneto, J.
    Mancini, F.
    Portela, J.R.
    Nebot, E.
    Cansell, F.
    Martínez de la Ossa, E.J.
    1600, Elsevier (144):
  • [24] Kinetic model for oxygen concentration dependence in the supercritical water oxidation of an industrial wastewater
    Sanchez-Oneto, J.
    Mancini, F.
    Portela, J. R.
    Nebot, E.
    Cansell, F.
    Martinez de la Ossa, E. J.
    CHEMICAL ENGINEERING JOURNAL, 2008, 144 (03) : 361 - 367
  • [25] RANDOM CHAIN ASSEMBLY MODEL FOR AMORPHOUS SULFUR, SELENIUM, AND TELLURIUM
    MALAURENT, JC
    DIXMIER, J
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1977, 43 (01): : K61 - K64
  • [26] Determination of micro amount of tellurium(IV) in crude selenium sample by kinetic-specatrophotometry
    Zhang Yu-Yang
    Deng Gui-Chun
    Zhang Xin
    Xing Nan-Nan
    Wang Wei
    Zhang Qian
    SPECTROSCOPY AND SPECTRAL ANALYSIS, 2008, 28 (03) : 652 - 655
  • [27] Application of catalytic kinetic photometric method in determination of arsenic, antimony, selenium, tellurium and thallium
    Xiyou Jinshu Cailiao Yu Gongcheng, 4 (47-50):
  • [28] Determination of micro amount of tellurium (IV) in crude selenium sample by kinetic-specatrophotometry
    Zhang, Yu-Yang
    Deng, Gui-Chun
    Zhang, Xin
    Xing, Nan-Nan
    Wang, Wei
    Zhang, Qian
    Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, 2008, 28 (03): : 652 - 655
  • [29] DETERMINATION OF TELLURIUM AND SELENIUM IN ATMOSPHERIC AEROSOL SAMPLES BY GRAPHITE-FURNACE ATOMIC-ABSORPTION SPECTROMETRY
    CHIOU, KY
    MANUEL, OK
    ANALYTICAL CHEMISTRY, 1984, 56 (14) : 2721 - 2723
  • [30] Hybrid Model of Industrial p-Xylene Oxidation Incorporated Fractional Kinetic Model with Intelligent Models
    Dong, Yaming
    Yan, Xuefeng
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2013, 52 (07) : 2537 - 2547
12345