Dissolution of Iron-Chromium Carbides during White Layer Formation induced by Hard Turning of AISI 52100 Steel

被引：23

作者：

Hosseini, S. B. ^{[1
]}

Dahlgren, R. ^{[1
]}

Ryttberg, K. ^{[2
]}

Klement, U. ^{[1
]}

机构：

[1] Chalmers Univ Technol, Dept Mat & Mfg Technol, Rannvagen 2A, SE-41296 Gothenburg, Sweden

[2] AB SKF, SE-41550 Gothenburg, Sweden

来源：

6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) | 2014年 / 14卷

关键词：

Carbide dissolution; DICTRA simulation; White layer; Hard turning; Surface integrity; AISI; 52100; steel; CEMENTITE DISSOLUTION; COMPUTER-SIMULATIONS;

D O I：

10.1016/j.procir.2014.03.095

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The (Fe, Cr)(3)C carbide morphology in the surface region of hard turned bainitic AISI 52100 steel was investigated using both experimental techniques and simulations, where microstructural analysis was correlated with analytical studies of the carbide dissolution kinetics using DICTRA(1). The experimental results showed that for both predominantly thermally and mechanically induced white layers no significant carbide dissolution took place down to a depth of 20 mu m below the machined surfaces. This was confirmed by the analytical results from DICTRA, which showed that no significant carbide dissolution should take place during hard turning given the short contact times. Within the hard turned surfaces up to similar to 12% of the carbides were elongated, indicating plastic deformation of the carbides during machining.

引用

页码：107 / 112

页数：6

共 40 条

[31] Atomic-scale investigation of carbon atom migration in surface induced white layers in high-carbon medium chromium (AISI 52100) bearing steel
Hosseini, S. S.
Thuvander, M.
Klement, U.
Sundell, G.
Ryttberg, K.
ACTA MATERIALIA, 2017, 130 : 155 - 163
[32] Artificial neural network-based modelling and prediction of white layer formation during hard turning of steels
Souid, Abdallah
Jomaa, Walid
Terres, Mohamed Ali
MATERIAUX & TECHNIQUES, 2024, 112 (03):
[33] A hybrid finite element method-artificial neural network approach for predicting residual stresses and the optimal cutting conditions during hard turning of AISI 52100 bearing steel
Umbrello, D.
Ambrogio, G.
Filice, L.
Shivpuri, R.
MATERIALS & DESIGN, 2008, 29 (04): : 873 - 883
[34] Multi-objective optimization of cutting parameters during sustainable dry hard turning of AISI 52100 steel with newly develop HSN2-coated carbide insert
Alok, Anupam
Das, Manas
MEASUREMENT, 2019, 133 : 288 - 302
[35] White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling
Bosheh, SS
Mativenga, PT
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (02): : 225 - 233
[36] Performance of Al2O3/TiC mixed ceramic inserts coated with TiAlSiN, WC/C and DLC thin solid films during hard turning of AISI 52100 steel
Kumar, Ch Sateesh
Patel, Saroj Kumar
Fernandes, Filipe
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 3380 - 3393
[37] Hard Turning of AISI D4 Steel Under Dry Machining and Gas Cooling Attempt is made for the Elimination of White Layer Also Enhancement of Surface Finish
Girisankar, S.
Murugan, S. Senthil
Srinivasan, S. P.
Shankar, E.
Rajkumar, A.
NATIONAL ACADEMY SCIENCE LETTERS-INDIA, 2024, 47 (05): : 539 - 546
[38] Simulation of Coupled White Layer Formation and Internal Stresses Evolution During Pulsed Thermomechanical Surface Treatment of AISI 1045 Annealed Steel
D. S. Denisevich
Mechanics of Solids, 2024, 59 (7) : 3818 - 3830
[39] White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools
Aramcharoen, A.
Mativenga, P. T.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 36 (7-8): : 650 - 657
[40] White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools
A. Aramcharoen
P. T. Mativenga
The International Journal of Advanced Manufacturing Technology, 2008, 36 : 650 - 657

← 1 2 3 4 →