Dissolution of Iron-Chromium Carbides during White Layer Formation induced by Hard Turning of AISI 52100 Steel

被引：23
|
作者：
Hosseini, S. B. [1 ]
Dahlgren, R. [1 ]
Ryttberg, K. [2 ]
Klement, U. [1 ]
机构：
[1] Chalmers Univ Technol, Dept Mat & Mfg Technol, Rannvagen 2A, SE-41296 Gothenburg, Sweden
[2] AB SKF, SE-41550 Gothenburg, Sweden
来源：
6TH CIRP INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC2014) | 2014年 / 14卷
关键词：
Carbide dissolution; DICTRA simulation; White layer; Hard turning; Surface integrity; AISI; 52100; steel; CEMENTITE DISSOLUTION; COMPUTER-SIMULATIONS;
D O I：
10.1016/j.procir.2014.03.095
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The (Fe, Cr)(3)C carbide morphology in the surface region of hard turned bainitic AISI 52100 steel was investigated using both experimental techniques and simulations, where microstructural analysis was correlated with analytical studies of the carbide dissolution kinetics using DICTRA(1). The experimental results showed that for both predominantly thermally and mechanically induced white layers no significant carbide dissolution took place down to a depth of 20 mu m below the machined surfaces. This was confirmed by the analytical results from DICTRA, which showed that no significant carbide dissolution should take place during hard turning given the short contact times. Within the hard turned surfaces up to similar to 12% of the carbides were elongated, indicating plastic deformation of the carbides during machining.
引用
收藏
页码：107 / 112
页数：6
相关论文
共 40 条
  • [1] Formation mechanisms of white layers induced by hard turning of AISI 52100 steel
    Hosseini, S. B.
    Klement, U.
    Yao, Y.
    Ryttberg, K.
    ACTA MATERIALIA, 2015, 89 : 258 - 267
  • [2] Experimental analysis of mechanisms related to white layer formation during hard turning of AISI 52100 bearing steel
    Umbrello, D.
    Rotella, G.
    MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (02) : 205 - 212
  • [3] Tool wear effects on white and dark layer formation in hard turning of AISI 52100 steel
    Attanasio, A.
    Umbrello, D.
    Cappellini, C.
    Rotella, G.
    M'Saoubi, R.
    WEAR, 2012, 286 : 98 - 107
  • [4] A descriptive phenomenological model for white layer formation in hard turning of AISI 52100 bearing steel
    Hosseini, S. B.
    Klement, U.
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 32 : 299 - 310
  • [5] Effects of Process Parameters on White Layer Formation and Morphology in Hard Turning of AISI52100 Steel
    Zhang, Xiao-Ming
    Chen, Li
    Ding, Han
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (07):
  • [6] Cutting temperatures during hard turning-Measurements and effects on white layer formation in AISI 52100
    Hosseini, S. B.
    Beno, T.
    Klement, U.
    Kaminski, J.
    Ryttberg, K.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (06) : 1293 - 1300
  • [7] Analysis of white layers formed in hard turning of AISI 52100 steel
    Ramesh, A
    Melkote, SN
    Allard, LF
    Riester, L
    Watkins, TR
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 390 (1-2): : 88 - 97
  • [8] An experimental study of the white layer formation during cryogenic assisted hard machining of AISI 52100 steel
    Nie, Guang-Chao
    Zhang, Xiao-Ming
    Zhang, Dong
    Ding, Han
    8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 223 - 226
  • [9] Effects of Sequential Cuts on White Layer Formation and Retained Austenite Content in Hard Turning of AISI52100 Steel
    Zhang, Xiao-Ming
    Huang, Xin-Da
    Chen, Li
    Leopold, Juergen
    Ding, Han
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (06):
  • [10] MODELING OF WHITE AND DARK LAYER FORMATION IN HARD MACHINING OF AISI 52100 BEARING STEEL
    Umbrello, D.
    Jayal, A. D.
    Caruso, S.
    Dillon, O. W.
    Jawahir, I. S.
    MACHINING SCIENCE AND TECHNOLOGY, 2010, 14 (01) : 128 - 147
1234