A modified hot tearing criterion for direct chill casting of aluminium alloys

被引：18
|
作者：
Bai, Q. L. [1 ]
Liu, J. C. [1 ]
Li, H. X. [1 ]
Du, Q. [2 ]
Katgerman, L. [3 ]
Zhang, J. S. [1 ]
Zhuang, L. Z. [1 ]
机构：
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[2] SINTEF Mat & Chem, Trondheim, Norway
[3] Delft Univ Technol, Dept Mat Sci & Engn, Mekelweg 2, NL-2628 CD Delft, Netherlands
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2016年 / 32卷 / 08期
关键词：
Direct chill casting; Hot tearing susceptibility; Fracture mechanics; A modified hot tearing criterion; MECHANICAL-PROPERTIES; SEMISOLID STATE; BEHAVIOR; SOLIDIFICATION; MODEL;
D O I：
10.1080/02670836.2015.1104081
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Using the good criteria to predict hot tearing is very important during DC casting of aluminium alloys. Among all the hot tearing criteria, a fracture-mechanics based SKK criterion proposed by Suyitno et al. has made considerable improvements in the hot tearing prediction. However, its obtained hot tearing susceptibility (HTS) evolution during solidification is also not completely consistent with real industrial production circumstances, especially when approaching the solidus temperature. In this paper, some further modifications are made based on the SKK criterion to emphasise the important effect of solid bridging/grain coalescence on hot tear propagation. It is proved that the HTS evolution in freezing range predicted by the modified hot tearing criterion is in good agreement with casting practice.
引用
收藏
页码：846 / 854
页数：9
相关论文
共 50 条
  • [21] Implementation of a strain-based hot tearing criterion in direct chill cast aluminum ingots
    Phillion, AB
    Cockcroft, SL
    Sengupta, J
    Maijer, DM
    [J]. LIGHT METALS 2005, 2005, : 1063 - 1068
  • [22] Prediction of Porosity and Hot Tearing in Direct Chill Casting of AZ31 Magnesium Alloy
    P. V. Sai Divya
    P. K. Penumakala
    A. K. Nallathambi
    [J]. Transactions of the Indian Institute of Metals, 2023, 76 : 1509 - 1516
  • [23] Magnesium direct chill casting: A comparison with aluminium
    Baker, PW
    McGlade, PT
    [J]. LIGHT METALS 2001, 2001, : 855 - 862
  • [24] A modified hot tearing criterion for steels
    Rindler, W
    Kozeschnik, E
    Enzinger, N
    Buchmayr, B
    [J]. Mathematical Modelling of Weld Phenomena 6, 2002, : 819 - 835
  • [25] Analysis of the impact of macrosegregation on hot tearing conditions during DC casting of aluminium alloys
    Ellingsen, K.
    M'Hamdi, M.
    Mortensen, D.
    Fjaer, H. G.
    [J]. INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (1-4) : 90 - 93
  • [26] Application of the Rappaz-Drezet-Gremaud Hot Tearing Criterion to Welding of Aluminium Alloys
    Drezet, J. -M.
    Allehaux, D.
    [J]. HOT CRACKING PHENOMENA IN WELDS II, 2008, : 19 - +
  • [27] Direct chill casting of aluminium alloys under electromagnetic interaction by permanent magnet assembly
    Bojarevics, Andris
    Kaldre, Imants
    Milgravis, Mikus
    Beinerts, Toms
    [J]. VIII INTERNATIONAL SCIENTIFIC COLLOQUIUM ON MODELLING FOR MATERIALS PROCESSING, 2018, 355
  • [28] Enhancement of chip breakability of aluminium alloys by controlling the solidification during direct chill casting
    Barekar, Nilam S.
    Skalicky, Ivan
    Barbatti, Carla
    Fan, Zhongyun
    Jarrett, Martin
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 862
  • [29] Two-phase modeling directed toward hot tearing formation in aluminum direct chill casting
    Mohammed M’Hamdi
    Asbjørn Mo
    Christophe L. Martin
    [J]. Metallurgical and Materials Transactions A, 2002, 33 : 2081 - 2093
  • [30] A quantitative hot tearing criterion for aluminum alloys
    Bagheri, Majid
    Alizadeh, Mostafa
    Ahmadi, Alireza
    Hajizamani, Mohsen
    [J]. ENGINEERING RESEARCH EXPRESS, 2024, 6 (03):
12345