Influence of Different Frequency Harmonic Generated by Rectifier on High-speed Permanent Magnet Generator

被引:3
|
作者
Qiu, Hongbo [1 ]
Wei, Yanqi [1 ]
Yang, Cunxiang [1 ]
Fan, Xiaobin [1 ]
机构
[1] Zhengzhou Univ Light Ind, Dept Elect & Informat Engn, Zhengzhou, Henan, Peoples R China
基金
中国国家自然科学基金;
关键词
High-speed permanent magnet generator; Harmonic current; Core loss; Eddy current loss; Torque ripple; TEMPERATURE-FIELDS;
D O I
10.5370/JEET.2018.13.5.1956
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Since the stator winding of High-Speed Permanent Magnet Generator (HSPMG) has few winding turns and low inductance value, it is more prone to be influenced by harmonic current. Moreover, the operation efficiency and the torque stability of HSPMG will be greatly influenced by harmonic current. Taking a 117 kW, 60 000 rpm HSPMG as an example, in order to analyze the effects of harmonic current on HSPMG in this paper, the 2-D finite element electromagnetic field model of the generator was established and the correctness of the model was verified by testing the generator prototype. Based on the model, the losses and torque of the generator under different frequency harmonic current were studied. The change rules of the losses and torque were found out. Based on the analysis of the influence of the harmonic phase angle on torque ripple, it is found that the torque ripple could be weakened through changing the harmonic phase angle. Through the analysis of eddy current density in rotor, the change mechanism of the rotor eddy current loss was revealed. These conclusions can contribute to reduce harmonic loss, prevent demagnetization fault and optimize torque ripple of HSPMG used in distributed power supply system.
引用
收藏
页码:1956 / 1964
页数:9
相关论文
共 50 条
  • [41] An evaluation of alternative stator lamination materials for a high-speed, 1.5 MW, permanent magnet generator
    Paulides, JJH
    Jewell, GW
    Howe, D
    IEEE TRANSACTIONS ON MAGNETICS, 2004, 40 (04) : 2041 - 2043
  • [42] Rotor Yoke Thickness of Coreless High-Speed Axial-Flux Permanent Magnet Generator
    Sadeghierad, M.
    Darabi, A.
    Lesani, H.
    Monsef, H.
    IEEE TRANSACTIONS ON MAGNETICS, 2009, 45 (04) : 2032 - 2037
  • [43] Control of High-speed Permanent Magnet Synchronous Machine
    Chysky, Jan
    Novak, Jaroslav
    Novak, Martin
    38TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2012), 2012, : 4484 - 4488
  • [44] SIMULATION OF PERMANENT MAGNET GENERATOR/RECTIFIER COMBINATION.
    Vadher, V.V.
    Smith, I.R.
    Fanthome, B.A.
    IEEE Transactions on Aerospace and Electronic Systems, 1986, AES-22 (01) : 64 - 70
  • [45] Thermal Optimization of a High-Speed Permanent Magnet Motor
    Dong, Jianning
    Huang, Yunkai
    Jin, Long
    Lin, Heyun
    Yang, Hui
    IEEE TRANSACTIONS ON MAGNETICS, 2014, 50 (02) : 749 - 752
  • [46] SIMULATION OF PERMANENT-MAGNET GENERATOR RECTIFIER COMBINATION
    VADHER, VV
    SMITH, IR
    FANTHOME, BA
    IEEE TRANSACTIONS ON AEROSPACE AND ELECTRONIC SYSTEMS, 1986, 22 (01) : 64 - 70
  • [47] Unified Control for the Permanent Magnet Generator and Rectifier System
    Xu, Zhuxian
    Zhang, Di
    Wang, Fred
    Boroyevich, Dushan
    2011 TWENTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2011, : 1888 - 1895
  • [48] Influence of sleeve conductivity on starting performance of high-speed permanent magnet synchronous starter generator for micro-gas turbine
    Qiu, Hongbo
    Zou, Xutian
    Sun, Junfeng
    Yang, Cunxiang
    Yi, Ran
    IET ELECTRIC POWER APPLICATIONS, 2020, 14 (11) : 2187 - 2192
  • [49] Influence of Driving Voltage on Starting Performance of High-Speed Permanent Magnet Synchronous Starter–Generator for Micro-gas Turbine
    Hongbo Qiu
    Kun Wang
    Xutian Zou
    Bin Xiong
    Xuanzong Wu
    Journal of Electrical Engineering & Technology, 2021, 16 : 3113 - 3123
  • [50] Comparative study of a high-speed permanent magnet motor when powered by different methods
    Qi, Zhenning
    Zhang, Yue
    IET ELECTRIC POWER APPLICATIONS, 2024, 18 (08) : 924 - 940