INFLUENCE OF COMBINED HEAT TREATMENT AND DENSIFICATION ON MECHANICAL PROPERTIES OF POPLAR WOOD

被引：19

作者：

Sozbir, Gonca Duzkale ^{[1
]}

Bektas, Ibrahim ^{[1
]}

Ak, Aysenur Kilic ^{[1
]}

机构：

[1] Kahramanmaras Sutcu Imam Univ, Fac Forest, Deparment Forest Ind Engn, Kahramanmaras, Turkey

来源：

MADERAS-CIENCIA Y TECNOLOGIA | 2019年 / 21卷 / 04期

关键词：

Bending strenght; compression strength; density; EMC; Populus usbekistanica; TECHNOLOGICAL PROPERTIES; THERMAL-TREATMENT; HIGH-TEMPERATURE; PINE; COMPRESSION; STRENGTH;

D O I：

10.4067/S0718-221X2019005000405

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

In this study, influence of combined heat treatment and densification on mechanical properties of poplar wood (Populus usbekistanica) such as density, EMC, compression strength, modulus of elasticy, modulus of rupture and static bending strength were investigated. Poplar samples were subjected to a temperature of 120 degrees C, 160 degrees C and 200 degrees C for 1 and 3h. After the heat treatment, the heat treated samples were compressed in a hot press at a temperature of 120 degrees C, press pressure of 5 MPa and press time of 30 minutes for densification. The results showed that the heat treatment affected the densification with increasing density. Additionally, the heat treatment decreased modulus of rupture (MOR), modulus of elasticity (MOE) and impact bending strength (IBS) with increasing temperature for undensified poplar wood. In conclusion, densification process has improved all the mechanical tested properties.

引用

页码：481 / 492

页数：12

共 50 条

[31] High-pressure densification and hydrophobic coating for enhancing the mechanical properties and dimensional stability of soft poplar wood boards
Yu, Yong
Li, Aqiang
Yan, Kaiya
Ramaswamy, Hosahalli S.
Zhu, Songming
Li, Huanhuan
JOURNAL OF WOOD SCIENCE, 2020, 66 (01)
[32] Mechanical and thermal properties of poplar wood polyacrylonitrile composites
Joshi, TK
Zaidi, MGH
Sah, PL
Alam, S
POLYMER INTERNATIONAL, 2005, 54 (01) : 198 - 201
[33] The Effects of Densification and Heat Post-Treatment on Hardness and Morphological Properties of Wood Materials
Budakci, Mehmet
Pelit, Huseyin
Sonmez, Abdullah
Korkmaz, Mustafa
BIORESOURCES, 2016, 11 (03): : 7822 - 7838
[34] SIMULTANEOUS TREATMENT WITH OIL HEAT AND DENSIFICATION ON PHYSICAL PROPERTIES OF Populus x Canadensis WOOD
Villasante, Antonio
Vignote, Santiago
Fernandez-Serrano, Alvaro
Laina, Ruben
MADERAS-CIENCIA Y TECNOLOGIA, 2022, 24
[35] Surface Properties of Poplar Wood after Heat Treatment, Resin Impregnation, or Both Modifications
Cao, Shuai
Cai, Jiabin
Wu, Meihui
Zhou, Nan
Huang, Zhenhua
Cai, Liping
Zhang, Yinglu
BIORESOURCES, 2021, 16 (04): : 7561 - 7576
[36] Poplar wood heat treatment: effect of air ventilation rate and initial moisture content on reaction kinetics, physical and mechanical properties
Goli, Giacomo
Marcon, Bertrand
Fioravanti, Marco
WOOD SCIENCE AND TECHNOLOGY, 2014, 48 (06) : 1303 - 1316
[37] Poplar wood heat treatment: effect of air ventilation rate and initial moisture content on reaction kinetics, physical and mechanical properties
Giacomo Goli
Bertrand Marcon
Marco Fioravanti
Wood Science and Technology, 2014, 48 : 1303 - 1316
[38] Effect of heat treatment on mechanical properties of selected wood joints
Kuzman, Manja Kitek
Kutnar, Andreja
Ayrilmis, Nadir
Kariz, Mirko
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2015, 73 (05) : 689 - 691
[39] Effect of heat treatment on mechanical properties of selected wood joints
Manja Kitek Kuzman
Andreja Kutnar
Nadir Ayrilmis
Mirko Kariz
European Journal of Wood and Wood Products, 2015, 73 : 689 - 691
[40] DENSIFICATION OF WOOD VENEERS COMBINED WITH OIL-HEAT TREATMENT. PART I: DIMENSIONAL STABILITY
Fang, Chang-Hua
Cloutier, Alain
Blanchet, Pierre
Koubaa, Ahmed
Mariotti, Nicolas
BIORESOURCES, 2011, 6 (01): : 373 - 385

← 1 2 3 4 5 →