An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materials

被引：58

作者：

Ertan, Rukiye ^{[1
]}

Yavuz, Nurettin ^{[1
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Mech Engn, TR-16059 Gorukle, Turkey

来源：

WEAR | 2010年 / 268卷 / 11-12期

关键词：

Brake materials; Sliding friction; Wear testing; FRICTION MATERIALS; PERFORMANCE; COMPACTION; OPTIMIZATION; DEFORMATION; TEMPERATURE; COMPOSITES; INTERFACE; BEHAVIOR; CONTACT;

D O I：

10.1016/j.wear.2010.02.026

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, a brake lining composition was investigated experimentally to investigate the effects of the manufacturing parameters on the tribological properties and to obtain optimal manufacturing parameters for improved tribological behaviour. The friction tests were performed using a Chase-type friction tester to find the relationship between the manufacturing parameters and tribological properties, such as the wear resistance and friction stability, depending on the test temperature and the number of braking. The density and roughness were also analysed in relation to the manufacturing parameters. The results showed that manufacturing parameters can substantially improve the tribological behaviour and manufacturing cost of brake lining as long as optimum values are chosen. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：1524 / 1532

页数：9

共 50 条

[41] Synergistic Effect of Nano- and Micrometer-Size Ceramic Fibers on the Tribological and Thermal Properties of Automotive Brake Lining
Wu, Yaoqing
Zeng, Ming
Yu, Ling
Fan, Liren
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (18) : 2732 - 2743
[42] A review on properties of conventional and metal matrix composite materials in manufacturing of disc brake
Shanker, P. Shiva
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 5864 - 5869
[43] Influence of different types of binder in non-asbestos-organic brake lining materials: A case study on inertia brake dynamometer
Kumar, Mukesh
Bijwe, Jayashree
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2014, 228 (05) : 584 - 592
[44] INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF BRAKE SHOE MATERIALS - PHOSPHORUS CAST IRONS WITH DIFFERENT GRAPHITE MORPHOLOGIES
ZHANG, Y
CHEN, Y
HE, R
SHEN, B
WEAR, 1993, 166 (02) : 179 - 186
[45] Tribological properties of the disc brake friction couple materials in the range of small and very small speeds
Stoica, N. A.
Petrescu, A. M.
Tudor, A.
Predescu, A.
13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16), 2017, 174
[46] Evaluation of friction materials' tribological properties and their effect on the dynamic response of disc-brake systems
El-Butch, AMA
BRAKES 2000: AUTOMOTIVE BRAKING - TECHNOLOGIES FOR THE 21ST CENTURY, 2000, : 51 - 60
[47] Effect of Type and Relative Amount of Solid Lubricants and Abrasives on the Tribological Properties of Brake Friction Materials
Ozturk, B.
Ozturk, S.
Adiguzel, Adem A.
TRIBOLOGY TRANSACTIONS, 2013, 56 (03) : 428 - 441
[48] Effect of limestone usage on tribological properties in copper and asbestos-free brake friction materials
Yavuz, Hicri
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2023, 75 (02) : 238 - 245
[49] Effect of braking pressure and braking speed on the tribological properties of C/SiC aircraft brake materials
Fan, Shangwu
Zhang, Litong
Cheng, Laifei
Tian, Guanglai
Yang, Shangjie
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (06) : 959 - 965
[50] Tribological Properties of Short Fiber C/SiC Brake Materials and 30CrSiMoVA Mate
Shangwu Fan
Junzhan Zhang
Litong Zhang
Laifei Cheng
Guanglai Tian
Haiping Liu
Tribology Letters, 2011, 43

← 1 2 3 4 5 →