Pressing and Infiltration of Metal Matrix Nanocomposites

被引：4
|
作者：
Porter, Quinton [1 ,2 ]
Li, Xiaochun [3 ]
Ma, Chao [1 ,2 ]
机构：
[1] Texas A&M Univ, Dept Engn Technol & Ind Distribut, College Stn, TX 77843 USA
[2] Texas A&M Univ, Dept Mech Engn, College Stn, TX 77843 USA
[3] Univ Calif Los Angeles, Dept Mech & Aerosp Engn, Los Angeles, CA 90095 USA
来源：
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING | 2021年 / 5卷 / 02期
关键词：
metal matrix nanocomposites; pressing; infiltration; powder metallurgy; MECHANICAL-PROPERTIES; MELT-INFILTRATION; ALUMINUM; COMPOSITES; MICROSTRUCTURE; NANOPARTICLES; FABRICATION; BEHAVIOR;
D O I：
10.3390/jmmp5020054
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The ability to produce metal matrix nanocomposites via pressing and infiltration was validated. Al/TiC nanocomposite was used as the model material. Pressing the powder in a die yielded cylindrical specimens with a green density of 1.98 +/- 0.05 g/cm(3), which was increased to only 2.11 +/- 0.12 g/cm(3) by sintering. Direct infiltration of the pressed specimens at 1050 degrees C for 3.5 h yielded specimens with a density of 3.07 +/- 0.08 g/cm(3), an open porosity of 3.06 +/- 1.40%, and an areal void fraction of 8.09 +/- 2.67%. The TiC nanoparticles were verified to be well dispersed using energy-dispersive X-ray spectroscopy. The measured hardness of 64 +/- 3 HRA makes it a promising material for structural applications in industries such as aerospace and automotive.
引用
收藏
页数：8
相关论文
共 50 条
  • [31] PRESSURELESS INFILTRATION OF ALUMINUM METAL-MATRIX COMPOSITES
    KAJIKAWA, Y
    NUKAMI, T
    FLEMINGS, MC
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (08): : 2155 - 2159
  • [32] Pressureless infiltration of aluminum metal-matrix composites
    Kajikawa, Y., 1600, Minerals, Metals & Materials Soc (TMS), Warrendale, PA, United States (26 A):
  • [33] A NEW INFILTRATION PROCESS FOR THE FABRICATION OF METAL MATRIX COMPOSITES
    AGHAJANIAN, MK
    BURKE, JT
    WHITE, DR
    NAGELBERG, AS
    SAMPE QUARTERLY-SOCIETY FOR THE ADVANCEMENT OF MATERIAL AND PROCESS ENGINEERING, 1989, 20 (04): : 43 - 46
  • [34] THE FABRICATION OF METAL MATRIX COMPOSITES BY A PRESSURELESS INFILTRATION TECHNIQUE
    AGHAJANIAN, MK
    ROCAZELLA, MA
    BURKE, JT
    KECK, SD
    JOURNAL OF MATERIALS SCIENCE, 1991, 26 (02) : 447 - 454
  • [35] A NEW INFILTRATION PROCESS FOR THE FABRICATION OF METAL MATRIX COMPOSITES
    AGHAJANIAN, MK
    BURKE, JT
    WHITE, DR
    NAGELBERG, AS
    TOMORROWS MATERIALS : TODAY, BOOK 1 AND 2: 34TH INTERNATIONAL SAMPE SYMPOSIUM AND EXHIBITION, 1989, 34 : 817 - 823
  • [36] Feasibility of ultrasonic infiltration in preparation of metal matrix composites
    Pan, J
    Yang, DM
    Wan, H
    INORGANIC MATRIX COMPOSITES, 1996, : 59 - 67
  • [37] Producing metal matrix syntactic foams by pressure infiltration
    Orbulov, Imre Norbert
    Dobránszky, János
    Periodica Polytechnica Mechanical Engineering, 2008, 52 (01): : 35 - 42
  • [38] Metal matrix syntactic foams produced by pressure infiltration-The effect of infiltration parameters
    Orbulov, Imre Norbert
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 583 : 11 - 19
  • [39] Sythesis of metal-ceramic nanocomposites by high-pressure infiltration
    Gierlotka, S
    Palosz, BF
    Swiderska-Sroda, A
    Grzanka, E
    Kalisz, G
    Fietkiewicz, K
    Stelmakh, S
    Lathe, C
    BULK AND GRADED NANOMETALS, 2005, 101-102 : 157 - 164
  • [40] Effect of Ceramic Reinforcement on the Properties of Metal Matrix Nanocomposites
    Saxena, Akash
    Singh, Neera
    Kumar, Devendra
    Gupta, Pallav
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (04) : 5561 - 5570
12345