FINITE ELEMENT MODELLING OF PUSH-OUT TESTS FOR BUBBLE DECK SYSTEM INCORPORATING INTO COMPOSITE STEEL-CONCRETE BEAMS

被引：0
|
作者：
Tan, E. L. [1 ]
Sisay, J. [1 ]
机构：
[1] Western Sydney Univ, Sch Comp Engn & Math, Parramatta, NSW 2751, Australia
来源：
PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON STEEL AND ALUMINIUM STRUCTURES (ICSAS19) | 2019年
关键词：
Steel-concrete composite beams; Push-out tests; Bubble deck system; Finite element modelling;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Bubble deck technology was developed in Europe in the 1990s by Danish engineer, Jorgen Breuning. This technology possesses many beneficial attributes such as cost effectiveness, reduced carbon footprint and construction time when compared to the conventional solid slab. In addition, these benefits could be enhanced when it is incorporated into steel-concrete composite structures. Therefore, this paper provides the finite element modelling of the push-out tests for bubble deck system incorporating into composite steel-concrete beams. These push-out tests investigate the shear capacity of the headed shear connectors. The finite element models provide similar results as compared to the experimental test results. The results also showed that there is no significant reduction of shear capacity in the presence of the voids near those headed shear connectors.
引用
收藏
页码：777 / 783
页数：7
相关论文
共 50 条
  • [41] Vibration Testing and Finite Element Modelling of a Steel-Concrete Composite Bridge
    Garcia-Fernandez, N.
    Aenlle, M.
    Gentile, Carmelo
    PROCEEDINGS OF THE 10TH INTERNATIONAL OPERATIONAL MODAL ANALYSIS CONFERENCE, IOMAC 2024, VOL 2, 2024, 515 : 137 - 144
  • [42] Shear performance of a novel demountable steel-concrete bolted connector under static push-out tests
    Yang, Fei
    Liu, Yuqing
    Jiang, Zhibo
    Xin, Haohui
    ENGINEERING STRUCTURES, 2018, 160 : 133 - 146
  • [43] Push-out tests on bolted shear connectors in composite cold-formed steel beams
    Hosseinpour, Mahmoud
    Zeynalian, Mehran
    Ataei, Abdoreza
    Daei, Maryam
    THIN-WALLED STRUCTURES, 2021, 164
  • [44] NON-LINEAR FINITE ELEMENT MODELLING OF PUSH-OUT TESTS WITH STUD SHEAR CONNECTORS
    Da Cruz, B. C.
    Vellasco, P. C. G. Da S.
    De Lima, L. R. O.
    De Andrade, S. A. L.
    Proceedings of the 7th International Conference on Steel and Aluminium Structures (ICSAS 2011), 2011, : 416 - 421
  • [45] Elastic-plastic finite element analysis for steel-concrete composite beams
    Zhou, LY
    Yu, ZW
    Nie, JG
    ICACS 2003: INTERNATIONAL CONFERENCE ON ADVANCES IN CONCRETE AND STRUCTURES, VOL 1 AND 2, 2003, 32 : 1388 - 1395
  • [46] Nonlinear analysis of prestressed composite steel-concrete beams by the finite element method
    Zong, Zhouhong
    Che, Huimin
    Fang, Zhenzheng
    Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, 2000, 13 (02): : 48 - 51
  • [47] BEHAVIOR OF HEADED STUDS IN COMPOSITE BEAMS - PUSH-OUT TESTS - DISCUSSION
    OEHLERS, DJ
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 1990, 17 (03) : 497 - 499
  • [48] Push-Out Behavior of Encased Rigid Shear Connectors in Steel-Concrete Joints
    Ahmadi, Mohammad Mehdi
    Mirghaderi, Seyed Rasoul
    Eghbali, Nasrin Bakhshayesh
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (10) : 13537 - 13557
  • [49] Stress transfer mechanism investigation in hybrid steel trussed-concrete beams by push-out tests
    Colajanni, Piero
    La Mendola, Lidia
    Monaco, Alessia
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2014, 95 : 56 - 70
  • [50] Push-out tests on adhesively bonded perfobond shear connectors for timber-concrete composite beams
    Appavuravther, Elif
    Vandoren, Bram
    Henriques, Jose
    JOURNAL OF BUILDING ENGINEERING, 2022, 57
12345