A novel approach for full-field measurement of principal stress directions in photoelasticity

被引：0
|
作者：
Chen, TY [1 ]
Chou, YC [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Engn Mech, Tainan 701, Taiwan
来源：
PROCEEDINGS OF THE SECOND INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY, VOL 2 | 2002年
关键词：
D O I：
暂无
中图分类号：
O65 [分析化学];
学科分类号：
070302 ; 081704 ;
摘要：
A novel approach, called min-max scan, is proposed to measure the full-field principal stress directions digitally. By using a light-field plan-polariscope and a PC-based image processing system, the intensities of the, model images under varying loads are scanned and compared in real-time to form images representing the minimum (isoclinics) and maximum intensities at each point on the model. The influence of isochromatics on the isoclinics is eliminated. Using two sets of images obtained at the angle of 0 and pi/8, respectively, the full-field principal stress directions can be determined in the range [0, pi/2]. Relevant theory for the proposed approach is introduced and the experiment results are shown.
引用
收藏
页码：277 / 279
页数：3
相关论文
共 50 条
  • [31] METHOD FOR MEASUREMENT OF FULL-FIELD ALIGNMENT.
    Heflinger, Bruce
    Eaton, Steven
    Jaeger, Rolf
    Karnezos, Marcos
    [J]. Microelectronic Engineering, 1986, 4 (04) : 269 - 283
  • [32] Full-Field Measurement of Strain and Transformation in Nitinol
    Perry, K. E.
    Labossiere, P. E.
    Steffler, E. S.
    [J]. SMST 2006: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON SHAPE MEMORY AND SUPERELASTIC TECHNOLOGIES, 2008, : 133 - +
  • [33] Computation of Full-field Strains Using Principal Component Analysis
    Grama, S. N.
    Subramanian, S. J.
    [J]. EXPERIMENTAL MECHANICS, 2014, 54 (06) : 913 - 933
  • [34] Full-field shape measurement of specular surfaces
    Kaminski, J
    Lowitzsch, S
    Knauer, MC
    Häusler, G
    [J]. FRINGE 2005, 2006, : 372 - +
  • [35] Photoelastic full-field measurement with a polarized microscope
    Zhao, Bing
    Fang, Ruhua
    [J]. Tongji Daxue Xuebao/Journal of Tongji University, 1999, 27 (01): : 25 - 28
  • [36] Full-field wafer warpage measurement technique
    Hsieh, H. L.
    Lee, J. Y.
    Huang, Y. G.
    Liang, A. J.
    Sun, B. Y.
    [J]. OPTICAL MEASUREMENT SYSTEMS FOR INDUSTRIAL INSPECTION X, 2017, 10329
  • [37] Determination of the full-field stress and displacement using photoelasticity and sampling moiré method in a 3D-printed model
    Zhangyu Ren
    Qi Zhang
    Yang Ju
    Huimin Xie
    [J]. Theoretical & Applied Mechanics Letters, 2022, 12 (06) : 409 - 418
  • [38] Determination of the full-field stress and displacement using photoelasticity and sampling moir? method in a 3D-printed model
    Ren, Zhangyu
    Zhang, Qi
    Ju, Yang
    Xie, Huimin
    [J]. THEORETICAL AND APPLIED MECHANICS LETTERS, 2022, 12 (06)
  • [39] Computation of Full-field Strains Using Principal Component Analysis
    S. N. Grama
    S. J. Subramanian
    [J]. Experimental Mechanics, 2014, 54 : 913 - 933
  • [40] Stress analysis and identification with full-field measurements
    Grediac, M.
    [J]. ADVANCES IN EXPERIMENTAL MECHANICS IV, 2005, 3-4 : 9 - 14
12345