EFFECTS OF GRAIN BOUNDARY MORPHOLOGIES ON STRESS CORROSION CRACKING OF ALLOY 600

被引：4
|
作者：
Kim, H. P. [1 ]
Choi, M. J. [1 ]
Kim, S. W. [1 ]
Kim, D. J. [1 ]
Lim, Y. S. [1 ]
Hwang, S. S. [1 ]
机构：
[1] Korea Atom Energy Res Inst, Nucl Mat Safety Res Div, 989-111 Daedeok Daero, Daejeon 305353, South Korea
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2017年 / 62卷 / 02期
基金：
新加坡国家研究基金会;
关键词：
Alloy; 600; NaOH; stress corrosion cracking; grain boundary morphologies; CREEP-RUPTURE PROPERTIES; INTERGRANULAR CORROSION; SENSITIZATION; MICROSTRUCTURE; INCONEL-600; BEHAVIOR; DESIGN;
D O I：
10.1515/amm-2017-0219
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Effects of grain boundary morphologies on stress corrosion cracking (SCC) of Alloy 600 have been studied in 40% NaOH at 315 degrees C using C-ring specimens. The configuration of the grain boundary and the intergranular carbide density were controlled by heat treatment. SCC tests were performed at + 150 mV above the corrosion potential. The specimen with a serrated grain boundary showed higher SCC resistance than that with a straight grain boundary. This appears to be caused by the fact that the specimen with the serrated grain boundary has longer SCC path. SCC resistance also increased with intergranular carbide density probably due to enhanced relaxation of stress at intergranular carbide.
引用
收藏
页码：1415 / 1419
页数：5
相关论文
共 50 条
  • [1] Effect of serrated grain boundary on stress corrosion cracking of Alloy 600
    Kim, H. P.
    Choi, M. J.
    Kim, S. W.
    Kim, D. J.
    Lim, Y. S.
    Hwang, S. S.
    NUCLEAR ENGINEERING AND TECHNOLOGY, 2018, 50 (07) : 1131 - 1137
  • [2] Surface grain boundary engineering of Alloy 600 for improved resistance to stress corrosion cracking
    Telang, Abhishek
    Gill, Amrinder S.
    Tammana, Deepthi
    Wen, Xingshuo
    Kumar, Mukul
    Teysseyre, S.
    Mannava, Seetha R.
    Qian, Dong
    Vasudevan, Vijay K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 648 : 280 - 288
  • [3] Effects of cold working path on strain concentration, grain boundary microstructure and stress corrosion cracking in Alloy 600
    Hou, J.
    Peng, Q. J.
    Shoji, T.
    Wang, J. Q.
    Han, E-H.
    Ke, W.
    CORROSION SCIENCE, 2011, 53 (09) : 2956 - 2962
  • [4] Correlation between Grain Boundary Migration and Stress Corrosion Cracking of Alloy 600 in Hydrogenated Steam
    Volpe, L.
    Burke, M.G.
    Scenini, F.
    Acta Materialia, 2020, 186 : 454 - 466
  • [5] Correlation between Grain Boundary Migration and Stress Corrosion Cracking of Alloy 600 in Hydrogenated Steam
    Volpe, L.
    Burke, M. G.
    Scenini, F.
    ACTA MATERIALIA, 2020, 186 : 454 - 466
  • [6] MICROSTRUCTURAL EFFECTS ON THE STRESS CORROSION CRACKING RESPONSE OF AN ALLOY 600
    Aguilar, A.
    Flores, O.
    Zagal, J. M.
    Martinez, L.
    Campillo, B.
    Lopez, H. F.
    EFFECTS OF HYDROGEN ON MATERIALS, 2009, : 267 - +
  • [7] STRESS-CORROSION CRACKING OF ALLOY 600
    THEUS, GJ
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1981, 39 : 450 - 451
  • [8] STRESS CORROSION CRACKING OF ALLOY 600.
    Serra, Eduardo
    Electric Power Research Institute (Report) EPRI NP, 1981,
  • [9] INFLUENCE OF GRAIN-BOUNDARY MICROSTRUCTURE ON THE SUSCEPTIBILITY OF ALLOY-600 TO INTERGRANULAR ATTACK AND STRESS-CORROSION CRACKING
    PAYNE, SM
    MCINTYRE, P
    CORROSION, 1988, 44 (05) : 314 - 319
  • [10] Microcrystallographical Characterization of Initiation of Intergranular Stress Corrosion Cracking on Alloy 600 in Terms of Local Stress at Grain Boundary Induced by Slip Deformation
    Jung, Ki-Taek
    Tsuchiya, Hiroaki
    Fujimoto, Shinji
    CORROSION, 2022, 78 (11) : 1058 - 1066
12345