Effect of internal pressure on plastic loads of 90° elbows with circumferential part-through surface cracks under in-plane bending

被引：17

作者：

Hong, Seok-Pyo ^{[1
]}

Kim, Jong-Hyun ^{[1
]}

Kim, Yun-Jae ^{[1
]}

Budden, P. J. ^{[2
]}

机构：

[1] Korea Univ, Dept Mech Engn, Sungbuk Ku, Seoul 136701, South Korea

[2] British Energy, Assessment Technol Grp, Gloucester GL4 3RS, England

来源：

ENGINEERING FRACTURE MECHANICS | 2010年 / 77卷 / 04期

关键词：

Circumferential crack; Combined pressure and in-plane bending; Elbow; Finite element limit analysis; Plastic load; PIPE BENDS; FINITE-ELEMENT; PIPING ELBOWS; LIMIT LOADS; COLLAPSE; MOMENT;

D O I：

10.1016/j.engfracmech.2009.11.013

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper quantifies the effect of internal pressure on plastic loads for elbows with circumferential through-wall and constant-depth part-through surface cracks under in-plane bending. Results are based on FE limit analyses using elastic-perfectly plastic materials and the non-linear geometry option. It is found that, for larger values of r/t, the pressure effect on plastic loads is more pronounced and plastic loads for combined loading cases could be much higher than those for pure bending cases. Full FE data of plastic loads are tabulated, and effects of crack geometries on interaction curves are discussed. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：577 / 596

页数：20

共 50 条

[41] SHAKEDOWN AND LIMIT ANALYSIS OF 45-DEGREE PIPING ELBOWS UNDER INTERNAL PRESSURE AND CYCLIC IN-PLANE BENDING
Peng, Heng
Liu, Yinghua
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 5, 2019,
[42] Closed-form collapse moment equations of elbows under combined internal pressure and in-plane bending moment
Chattopadhyay, J
Nathani, DK
Dutta, BK
Kushwaba, HS
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2000, 122 (04): : 431 - 436
[43] ESTIMATION OF STRESS INTENSITY FACTOR FOR CIRCUMFERENTIAL THROUGH-WALL CRACKED ELBOWS SUBJECTED TO IN-PLANE BENDING
Surh, Han-Bum
Kim, Jong Wook
Kim, Min Kyu
Won, Min-Gu
Kim, Moon Ki
Choi, Jae-Boong
Huh, Nam-Su
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 6A, 2015,
[44] Limit loads for piping branch junctions under internal pressure and in-plane bending - Extended solutions
Kim, Yun-Jae
Lee, Kuk-Hee
Park, Chi-Yong
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2008, 85 (06) : 360 - 367
[45] Fracture studies on carbon steel elbows having part-through notch with and without internal pressure
Saravanan, M.
Vishnuvardhan, S.
Gandhi, P.
Pukazhendhi, D. M.
Raghava, G.
Sahu, M. K.
Chattopadhyay, J.
Dutta, B. K.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2016, 138 : 19 - 30
[46] ELASTIC PLASTIC PROBLEM FOR A PLATE WITH A PART-THROUGH CRACK UNDER EXTENSION AND BENDING
CIVELEK, MB
ERDOGAN, F
INTERNATIONAL JOURNAL OF FRACTURE, 1982, 20 (01) : 33 - 46
[47] Elastic-plastic J and COD estimates for circumferential through-wall cracks between elbows and straight pipes under bending
Song, Tae-Kwang
Kim, Yun-Jae
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 5, 2008, : 183 - 191
[48] EFFECT OF BEND ANGLE ON PLASTIC LIMIT LOADS OF PIPE BENDS UNDER IN-PLANE BENDING MOMENT
Li, Shunjie
Zhou, Changyu
Li, Jian
Miao, Xinting
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 3, 2017,
[49] Part-through cracks in round bars under cyclic combined axial and bending loading
Carpinteri, A
Brighenti, R
INTERNATIONAL JOURNAL OF FATIGUE, 1996, 18 (01) : 33 - 39
[50] Closed-Form Plastic Collapse Loads of Pipe Bends Under Combined Pressure and In-Plane Bending
Oh, Chang-Sik
Kim, Yun-Jae
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2006, 30 (08) : 1008 - 1015

← 1 2 3 4 5 →