A microcontroller-based milling process monitoring and management system

被引：4

作者：

Prickett, P. W. ^{[1
]}

Grosvenor, R. I. ^{[1
]}

机构：

[1] Cardiff Univ, Sch Engn, Cardiff CF4 0YF, Wales

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2007年 / 221卷 / 02期

关键词：

tool life; milling cutting forces; machine tool condition monitoring; e-monitoring; cutting process management;

D O I：

10.1243/09544054JEM556SC

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper introduces an approach to monitoring the milling process using low-cost microcontrollers. The work is based upon a system developed to detect tool breakage. The deployed system continuously monitors the spindle motor drive to acquire, process, and communicate data relating to the work undertaken by an individual cutter. This information is packaged and sent to a central server where it can be managed to provide an accurate record of tool usage. It is proposed that such information can be used more simply than existing tool life calculations to support tool management systems. This has implications for the effective management of cutting tools at the machine tool and factory levels.

引用

页码：357 / 362

页数：6

共 50 条

[21] Design of microcontroller-based battery management system for pure electric vehicle
[J]. Xin, Z. (xinzhecau@163.com), 1600, Chinese Society of Agricultural Engineering (30):
[22] Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system
Julie Z. Zhang
Joseph C. Chen
[J]. The International Journal of Advanced Manufacturing Technology, 2008, 39 : 118 - 128
[23] Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system
Department of Industrial Technology, University of Northern Iowa, 32 ITC, Cedar Falls, IA 50614, United States
不详
[J]. International Journal of Advanced Manufacturing Technology, 2008, 39 (1-2): : 118 - 128
[24] Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system
Zhang, Julie Z.
Chen, Joseph C.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 39 (1-2): : 118 - 128
[25] Monitoring a greenhouse using a microcontroller-based meteorological data-acquisition system
Ameur, S
Laghrouche, M
Adane, A
[J]. RENEWABLE ENERGY, 2001, 24 (01) : 19 - 30
[26] Microcontroller-Based Monitoring and Controlling of Environmental Conditions in Farming
Kalezhi, Josephat
Mbale, Jameson
Ndovi, Lusungu
[J]. 2018 IEEE PES/IAS POWERAFRICA CONFERENCE, 2018, : 284 - 288
[27] Design of a low-power microcontroller-based wireless ECG monitoring system
Fariborzi, H.
Moghavvemi, M.
Mehrkanoon, S.
[J]. 2007 5TH STUDENT CONFERENCE ON RESEARCH AND DEVELOPMENT, 2007, : 191 - 194
[28] Microcontroller-based ground weapon control system
Kishore, MS
[J]. DEFENCE SCIENCE JOURNAL, 2001, 51 (04) : 429 - 435
[29] A MICROCONTROLLER-BASED INTELLIGENT BATTERY(TM) SYSTEM
BOWEN, L
ZARR, R
DENTON, S
[J]. IEEE AEROSPACE AND ELECTRONIC SYSTEMS MAGAZINE, 1994, 9 (05) : 16 - 19
[30] EEPROMS ENHANCE MICROCONTROLLER-BASED SYSTEM PERFORMANCE
ORLANDO, R
[J]. EDN, 1990, 35 (21) : 213 - 217

← 1 2 3 4 5 →