Foaming of aluminium-silicon alloy using concentrated solar energy

被引：27

作者：

Cambronero, L. E. G. ^{[1
]}

Canadas, I. ^{[2
]}

Martinez, D. ^{[2
]}

Ruiz-Roman, J. M. ^{[1
]}

机构：

[1] ETSIM UPM, Grp Mat Hibridos, Madrid 28003, Spain

[2] CIEMAT, Plataforma Solar Almeria, Tabernas, Almeria, Spain

来源：

SOLAR ENERGY | 2010年 / 84卷 / 06期

关键词：

Aluminium foam; Solar heating; Foaming treatment;

D O I：

10.1016/j.solener.2009.11.014

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Solar energy is used for the work reported here as a nonconventional heating system to produce aluminium foam from Al-Si alloy precursors produced by powder metallurgy. A commercial precursor in cylindrical bars enclosed in a stainless-steel mould was heated under concentrated solar radiation in a solar furnace with varied heating conditions (heating rate, time, and temperature). Concentrated solar energy close to 300 W/cm(2) on the mould is high enough to achieve complete foaming after heating for only 200 s. Under these conditions, the density and pore distribution in the foam change depending on the solar heating parameters and mould design. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：879 / 887

页数：9

共 50 条

[41] STRUCTURE OF PURE ALUMINIUM-SILICON EUTECTICS
BELL, JAE
WINEGARD, WC
JOURNAL OF THE INSTITUTE OF METALS, 1965, 93 : 318 - &
[42] Effect of surface etching on the lubricated sliding wear of an eutectic aluminium-silicon alloy
Das, S.
Perry, T.
Biswas, S. K.
TRIBOLOGY LETTERS, 2006, 21 (03) : 193 - 204
[43] Embedded lead inclusions in aluminium, aluminium-silicon eutectic alloys and silicon
Hagège, S
Haas, L
Ochin, P
Dezellus, A
Plaindoux, P
Rouchaud, JC
INTERGRANULAR AND INTERPHASE BOUNDARIES IN MATERIALS, IIB98, 1999, 294-2 : 473 - 476
[44] REFINING ALUMINIUM-SILICON ALLOYS BY CENTRIFUGING
SINGLETON, OR
ROBINSON, GC
JOURNAL OF THE INSTITUTE OF METALS, 1971, 99 (MAY): : 155 - +
[45] MODIFICATION OF ALUMINIUM-SILICON ALLOYS WITH STRONTIUM
JENKINSON, DC
HOGAN, LM
JOURNAL OF CRYSTAL GROWTH, 1975, 28 (02) : 171 - +
[46] FUNDAMENTALS OF MODIFICATION IN ALUMINIUM-SILICON SYSTEM
KIM, CB
HEINE, RW
JOURNAL OF THE INSTITUTE OF METALS, 1964, 92 (11): : 367 - &
[47] The Influence of Aluminium-Silicon Alloy on ZDDP Tribofilm Formation on the Counter-Surface
Shimizu, Yasunori
Spikes, Hugh A.
TRIBOLOGY LETTERS, 2017, 65 (04)
[48] Measurement of the thermophysical properties of an aluminium-silicon casting alloy in the solid and molten regions
Blumm, J
Henderson, JB
Hagemann, L
HIGH TEMPERATURES-HIGH PRESSURES, 1998, 30 (02) : 153 - 157
[49] INVESTIGATION ON TOOL WEAR RATE FOR MODIFIED AND UNMODIFIED ALUMINIUM-SILICON CASTING ALLOY
Haque, M. M.
Khan, A. A.
Ismail, Ahmad F.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 826 - 831
[50] EFFECT OF STRUCTURAL MODIFICATION AND LOAD ON THE WEAR OF A HYPEREUTECTIC ALUMINIUM-SILICON ALLOY.
Jaleel, T.K.A.
Raman, N.
Sanjay Kumar Biswas
Sreenivasa Murthy, K.S.
1600, (60):

← 1 2 3 4 5 →