On-line compressor blade stiffness enhancement in multi-axis machining process by controlling of tension force

被引：5

作者：

Luo, M. ^{[1
]}

Zhang, X. F. ^{[1
]}

Zhang, D. H. ^{[1
]}

Wu, B. H. ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Key Lab Contemporary Design & Integrated Mfg Tecn, Xian 710072, Peoples R China

来源：

IFAC PAPERSONLINE | 2015年 / 48卷 / 03期

关键词：

Machining; vibration stiffness; on-line; fixture; thin-walled workpiece; FIXTURE;

D O I：

10.1016/j.ifacol.2015.06.158

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

To enhance the stiffness in multi-axis machining of thin-walled compressor blade to suppress vibration, an on-line stiffness enhancement method based on axial force control was developed. Mathematical derivation shows that the action of axial clamping tension force will reduce the deflection of the workpiece and enhance the stiffness. Based on the derivation and analysis results, an on-line stiffness enhancement device was developed for compressor blade machining. Different tension force were applied in the axial direction and frequency-amplitude relationships were obtained. Initial experimental results show that the proposed method can enhance the system stiffness in multi-axis machining of thin-walled blade. It can be further developed to get full control of the machining process. (C) 2015, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved.

引用

页码：664 / 667

页数：4

共 44 条

[31] Force model of freeform surface multi-axis machining with fillet end mill based on analytical contact analysis
Minglong Guo
Zhaocheng Wei
Shiquan Li
Minjie Wang
Hang Gao
Zhiwei Zhao
Shengxian Liu
The International Journal of Advanced Manufacturing Technology, 2022, 118 : 1283 - 1294
[32] Force model of freeform surface multi-axis machining with fillet end mill based on analytical contact analysis
Guo, Minglong
Wei, Zhaocheng
Li, Shiquan
Wang, Minjie
Gao, Hang
Zhao, Zhiwei
Liu, Shengxian
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118 (3-4): : 1283 - 1294
[33] Fast cutterworkpiece engagement estimation method for prediction of instantaneous cutting force in continuous multi-axis controlled machining
2013, Fuji Technology Press (07)
[34] Multi-physics simulation of electro-chemical machining process for three-dimensional compressor blade
Fujisawa, Toshiaki
Inaba, Kazuaki
Yamamoto, Makoto
Kato, Dai
FEDSM 2007: PROCEEDINGS OF THE 5TH JOINT AMSE/JSME FLUIDS ENGINEERING SUMMER CONFERENCE VOL 1, PTS A AND B, 2007, : 1779 - 1786
[35] Novel Online Re-Calibration Method for Multi-Axis Force/Torque Sensor of ITER Welding/Machining Robot
Roozbahani, Hamid
Fakhrizadeh, Alireza
Haario, Heikki
Handroos, Heikki
IEEE SENSORS JOURNAL, 2013, 13 (11) : 4432 - 4443
[36] Fast Cutter Workpiece Engagement Estimation Method for Prediction Of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining
Kaneko, Jun'ichi
Horio, Kenichiro
3RD CIRP CONFERENCE ON PROCESS MACHINE INTERACTIONS, 2012, 4 : 151 - 156
[37] Effect of Machining Parameters on Surface Roughness in Al 2618 Alloy Subject to Multi-axis Machining Process Using Ball Nose Cutting Tools
Tabriz, Md Shams E.
Barrans, Simon M.
Bills, Paul J.
2017 8TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2017, : 16 - 20
[38] Material bead deposition with 2 + 2 ½ multi-axis machining process planning strategies with virtual verification for extruded geometry
Urbanic, Ruth Jill (jurbanic@uwindsor.ca), 1600, Springer London (95): : 9 - 12
[39] Material bead deposition with 2 + 2 ½ multi-axis machining process planning strategies with virtual verification for extruded geometry
Ruth Jill Urbanic
Robert W. Hedrick
Syed Saquib
Navid Nazemi
The International Journal of Advanced Manufacturing Technology, 2018, 95 : 3167 - 3184
[40] A Neural Network-Based Multi-Sensor On-Line Process Monitoring in Stone Machining
Klaic, Miho
Brezak, Danko
Staroveski, Tomislav
Bagaric, Dora
IFAC PAPERSONLINE, 2023, 56 (02): : 3732 - 3737

← 1 2 3 4 5 →