Investigation of different materials for macroencapsulation of salt hydrate phase change materials for building purposes

Most of the installed phase change material in buildings is expensive microencapsulated paraffin, which is flammable. Salt hydrates are corrosive and hygroscopic but cheap. A suitable salt hydrate encapsulation material would be of great interest to the construction industry. Thus, macroencapsulation can be a possible and cheap opportunity. Therefore, different methods to macroencapsulate phase change material, consisting of 50 wt% MgCl2 x 6H(2)O and 50 wt% CaCl2 x 6H(2)O, were investigated. The investigation results show that the foils with a layer of aluminum or polyvinylidene chloride and liquid spar varnish with additives (mica, graphite, glass flakes) are suitable materials. Furthermore, liquid rubber (Noxyde((R))), liquid EPDM (ethylene propylene diene (M-class)) and liquid polyvinylidene chloride as well as butyl rubber as extruded tape, malleable modelling clay or injectable mass were tested. These materials are also usable, whereas liquid two-component polysulfide and other foils are not suitable. In conclusion, the supplier can decide to use foils or liquid materials based on the application, the construction material and the price. (C) 2018 Elsevier Ltd. All rights reserved.