Dry Sliding Wear Behavior of Fe3Al Intermetallics Prepared by Mechanical Alloying and Hot Pressing

被引：3
|
作者：
Li, Jing [1 ]
Yu, Kuan [1 ]
Shi, Lei [1 ]
Ma, Zhongquan [1 ]
机构：
[1] Shandong Jianzhu Univ, Jinan, Peoples R China
来源：
MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2 | 2009年 / 79-82卷
关键词：
Fe(3)Al; Intermetallics; Hot pressing; Wear behavior;
D O I：
10.4028/www.scientific.net/AMR.79-82.1939
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fe(3)Al intermetallics with different Al contents were prepared by mechanical alloying and hot pressing. The phases and dry sliding wear behavior were studied. The results show that Fe(3)Al bulk materials are mainly characterized by the low ordered B2 structure. The wear resistance increased with increasing Al content, with the lowest volume loss of Fe-32Al and irregular value of Fe-30Al. There were obvious differences in wear mechanisms of sintered Fe(3)Al under different testing conditions. Under lower loads plastic deformation occurred on the wear surface and the wear performance is mainly particle abrasion, the characteristics of which are micro cutting and furrows. With higher loads, the stress concentration led to rapid crack propagation and eventually the fatigue fracture, which was characterized by brittle split of material.
引用
收藏
页码：1939 / 1942
页数：4
相关论文
共 50 条
  • [21] Effect of the alloying element chromium on the room temperature ductility of Fe3Al intermetallics
    Huang, YD
    Yang, WY
    Sun, ZQ
    INTERMETALLICS, 2001, 9 (02) : 119 - 124
  • [22] Electrical properties of Fe3Al intermetallics
    Jinshu Xuebao/Acta Metallurgica Sinica, 1998, 34 (11): : 1126 - 1130
  • [23] Mechanical and wear properties of Al-Al3Mg2 nanocomposites prepared by mechanical milling and hot pressing
    A. Zolriasatein
    R.A. Khosroshahi
    M. Emamy
    N. Nemati
    International Journal of Minerals Metallurgy and Materials, 2013, 20 (03) : 290 - 297
  • [24] Mechanical and wear properties of Al-Al3Mg2 nanocomposites prepared by mechanical milling and hot pressing
    A. Zolriasatein
    R. A. Khosroshahi
    M. Emamy
    N. Nemati
    International Journal of Minerals, Metallurgy, and Materials, 2013, 20 : 290 - 297
  • [25] Mechanical and wear properties of Al-Al3Mg2 nanocomposites prepared by mechanical milling and hot pressing
    Zolriasatein, A.
    Khosroshahi, R. A.
    Emamy, M.
    Nemati, N.
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2013, 20 (03) : 290 - 297
  • [26] High-Temperature Oxidation of Fe3Al and Fe3Al–Zr Intermetallics
    S. Chevalier
    P. Juzon
    G. Borchardt
    A. Galerie
    K. Przybylski
    J. P. Larpin
    Oxidation of Metals, 2010, 73 : 43 - 64
  • [27] Mechanical and interfacial characterisation of Fe3Al and Fe3Al-Al2O3 intermetallic composite made by mechanical smearing and hot isostatic pressing
    Mukherjee, SK
    Bandyopadhyay, S
    COMPOSITES PART B-ENGINEERING, 1997, 28 (1-2) : 45 - 48
  • [28] Structure of Ti-Al-Nb intermetallics produced by mechanical alloying and hot-pressing techniques
    Dutkiewicz, J
    Maziarz, W
    Heinrich, H
    Kostorz, G
    MATERIALS CHEMISTRY AND PHYSICS, 2003, 81 (2-3) : 414 - 416
  • [29] Preparation of Fe3Al intermetallic compound by mechanical alloying method
    Wu, Jian-Peng
    Cao, Li-Yun
    Huang, Jian-Feng
    He, Hai-Yan
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2009, 38 (SUPPL. 1): : 412 - 415
  • [30] Dry sliding wear behavior of in situ Al-Al4C3 metal matrix composite produced by mechanical alloying technique
    Arik, Halil
    Ozcatalbas, Yusuf
    Turker, Mehmet
    MATERIALS & DESIGN, 2006, 27 (09) : 799 - 804
12345