Analysis of the precision sustainability of the preload double-nut ball screw with consideration of the raceway wear

被引：23

作者：

Zhao, Jiajia ^{[1
]}

Lin, Mingxing ^{[1
]}

Song, Xianchun ^{[1
]}

Guo, Qizhen ^{[2
]}

机构：

[1] Shandong Univ, Natl Demonstrat Ctr Expt Mech Engn Educ, Key Lab High Efficiency & Clean Mech Manufacture, Minist Educ,Sch Mech Engn, Jinan, Shandong, Peoples R China

[2] Beijing Inst Technol, Inst Advance Struct Technol, Beijing Key Lab Lightweight Multifunct Composite, Beijing, Peoples R China

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2020年 / 234卷 / 09期

基金：

中国国家自然科学基金;

关键词：

Ball screw; coupling wear model; preload loss; precision sustainability; precision life; KINEMATICS;

D O I：

10.1177/1350650119883484

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Ball screws are the driving components used to convert the rotational motion into linear motion in precision equipment. However, the machining accuracy of precision equipment is directly determined by the positioning accuracy of the ball screw. The authors analyze the precision sustainability of preload double-nut ball screws with raceway wear. A new wear model combining the modified Archard theory and the iterative interpolation method is established to analyze the variations in wear depth. A new model considering the coupling relationship between raceway wear and preload loss is proposed to study the precision life of the double-nut ball screw. In addition, a novel running test bench is designed to verify the precision sustainability of ball screws. The precision sustainability of the ball screw is analyzed during its life cycle, and these results match the theoretical values obtained by using the wear model.

引用

页码：1530 / 1546

页数：17

共 50 条

[21] An integrated lifetime prediction method for double-nut ball screws subject to preload loss failure mode
Zhou, Hua-Xi
Zhou, Chang-Guang
Feng, Hu-Tian
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY, 2023, 237 (06) : 1248 - 1258
[22] Calculation of the Heat Flux from a Ball Screw Nut to the Nut Raceway
Kuo, Tzu-Chien
Yang, An-Shik
Hwang, Yih-Chyun
Hsieh, Wen-Hsin
MACHINES, 2023, 11 (03)
[23] Design of new giant magnetostrictive structures for double-nut ball screw pre-tightening
Qingdong Wang
Mingxing Lin
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39 : 3181 - 3188
[24] Design of new giant magnetostrictive structures for double-nut ball screw pre-tightening
Wang, Qingdong
Lin, Mingxing
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (08) : 3181 - 3188
[25] Research on the Degradation of the Axial Natural Frequency of the Double-Nut Ball Screw Feed Drive System
Xie, Jinglun
Zhou, Changguang
Nie, Conghui
Feng, Hutian
Zhou, Huaxi
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (11): : 120 - 132
[26] Modeling of Ball Screw-Nut Interface Stiffness With Wear (Ball Screw Wear Dynamics)
Heydarnia, Hoda
Altintas, Yusuf
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2025, 147 (02):
[27] Electromechanical coupling measurement of new giant magnetostrictive structure for double-nut ball screw pre-tightening
Wang, Qingdong
Lin, Mingxing
MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 27 (12)
[28] Analysis of a ball screw with a preload and lubrication
Wei, Chin Chung
Lin, Jen Fin
Horng, Jeng-Haur
TRIBOLOGY INTERNATIONAL, 2009, 42 (11-12) : 1816 - 1831
[29] Static load distribution and axial static contact stiffness of a preloaded double-nut ball screw considering geometric errors
Liu, Jun
Feng, Hutian
Zhou, Changguang
MECHANISM AND MACHINE THEORY, 2022, 167
[30] Static Stiffness Analysis of Double-nut Ball Screws Considering Dimensional Errors and Radial Loads
Chen G.
Weng Z.
Zhang S.
Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2023, 34 (24): : 2952 - 2962

← 1 2 3 4 5 →