Effect of reactive sintering conditions on microstructure of Fe-Al-Si alloys

被引:29
|
作者
Novak, Pavel [1 ]
Michalcova, Alena [1 ]
Voderova, Milena [1 ]
Sima, Miroslav [1 ]
Serak, Jan [1 ]
Vojtech, Dalibor [1 ]
Wienerova, Katerina [1 ]
机构
[1] Inst Chem Technol, Dept Met & Corros Engn, CR-16628 Prague 6, Czech Republic
关键词
Intermetallics; Powder metallurgy; Sintering; Microstructure; Metallography; Scanning electron microscopy; DIFFUSION;
D O I
10.1016/j.jallcom.2009.12.040
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this work, the dependence of microstructure of Fe-Al-Si alloy on conditions of reactive sintering was studied. It was shown that heating rate strongly affects the structure of this alloy. The microstructure consisting of uniformly distributed Al(2)Fe(3)Si(3) particles in Al(2)FeSi matrix can only be obtained in this material by rapid heating (over 300 K mm(-1)). Sufficient reactive sintering temperature to obtain Al(2)Fe(3)Si(3)-Al(2)FeSi two-phase structure is 750 degrees C. Further increase of the reaction temperature reduces porosity but causes a growth of Al(2)Fe(3)Si(3) particles. Reactive sintering process is completed during less than 10 min in the investigated material. Temperatures over 1050 degrees C produce material composed of FeSi, FeAl and Al(2)Fe(3)Si(3) phases. However, strongly exothermal reaction of FeSi formation causes melting of the sample. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:81 / 86
页数:6
相关论文
共 50 条
  • [21] Preparation of Fe-Al-Si Intermetallic Compound by Mechanical Alloying and Spark Plasma Sintering
    Hausild, P.
    Karlik, M.
    Cech, J.
    Prusa, F.
    Nova, K.
    Novak, P.
    Minarik, P.
    Kopecek, J.
    ACTA PHYSICA POLONICA A, 2018, 134 (03) : 724 - 728
  • [22] Oxidation Behavior of Fe-Al, Fe-Si and Fe-Al-Si Intermetallics
    Novak, Pavel
    Nova, Katerina
    MATERIALS, 2019, 12 (11):
  • [23] Effect of Si and Zr on the Microstructure and Properties of Al-Fe-Si-Zr Alloys
    Morozova, Anna
    Mogucheva, Anna
    Bukin, Dmitriy
    Lukianova, Olga
    Korotkova, Natalya
    Belov, Nikolay
    Kaibyshev, Rustam
    METALS, 2017, 7 (11):
  • [24] Preparation of Ti-Al-Si alloys by reactive sintering
    Novak, Pavel
    Michalcova, Alena
    Serak, Jan
    Vojtech, Dalibor
    Fabian, Tomas
    Randakova, Simona
    Prusa, Filip
    Knotek, Vitezslav
    Novak, Michal
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 470 (1-2) : 123 - 126
  • [25] X-RAY SPECTRA AND CHEMICAL BOND OF Fe-Al-Si ALLOYS.
    Shcherba, I.D.
    Nikolaev, L.I.
    Ristic, M.M.
    Science of sintering, 1987, 19 (02) : 101 - 104
  • [26] SOFT MAGNETIC-PROPERTIES OF RAPIDLY QUENCHED FE-AL-SI, FE-AL-B, FE-AL-GE ALLOYS
    SATO, F
    ISHIO, S
    MIYAZAKI, T
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1988, 107 (01): : 355 - 363
  • [27] Effect of Fe Intermetallics on Microstructure and Properties of Al-7Si Alloys
    James Mathew
    Guillaume Remy
    Mark A. Williams
    Fengzai Tang
    Prakash Srirangam
    JOM, 2019, 71 : 4362 - 4369
  • [28] Effect of Fe Intermetallics on Microstructure and Properties of Al-7Si Alloys
    Mathew, James
    Remy, Guillaume
    Williams, Mark A.
    Tang, Fengzai
    Srirangam, Prakash
    JOM, 2019, 71 (12) : 4362 - 4369
  • [29] Effect of Si, Co, Fe contents and cooling condition on the microstructure of Al-Si-Co(-Fe) alloys
    Li, Zhenlei
    Li, Shihang
    Gao, Long
    Li, Mengyu
    Gao, Tong
    MATERIALS RESEARCH EXPRESS, 2023, 10 (09)
  • [30] Effect of Sn on the sintering of Fe-Si alloys
    Li, J. G.
    Yuan, W. J.
    Zhou, Y.
    Zhang, L. M.
    HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2, 2008, 368-372 : 1591 - 1592