The effects of heat treatment on the mechanical properties of cold-sprayed coatings

被引:174
|
作者
Huang, Renzhong [1 ]
Sone, Michiyoshi [1 ]
Ma, Wenhua [1 ]
Fukanuma, Hirotaka [1 ]
机构
[1] Plasma Giken Co Ltd, Toshima Ku, Tokyo, Japan
来源
关键词
Cold spray; Tensile strength; Elongation; Fracture surface; Heat treatment; ANNEALING TREATMENT; ELASTIC-MODULUS; MICROSTRUCTURE; RECRYSTALLIZATION; POROSITY; STEEL;
D O I
10.1016/j.surfcoat.2014.11.017
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In the cold spray process, deposition of particles takes place through intensive plastic deformation upon impact in a solid state at temperatures well below their melting point. Therefore, spray particles experience little oxidation or decomposition during this process. As a result, cold-sprayed coatings have excellent mechanical, electrical and thermal properties. In this work, pure Al, Cu, Ti and stainless steel 316 were deposited by cold spray. The tensile strength and elongation of these coatings were also measured. The results showed that the as-sprayed coatings of the four materials have poor ductility and almost no elongation. However, heat treatment can improve the mechanical properties of the cold-sprayed coatings to some extent. Here, the effects of heat treatment conditions on the mechanical properties of the four cold-sprayed materials are discussed. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:278 / 288
页数:11
相关论文
共 50 条
  • [31] Effect of Powder Particle Size on Microstructure and Mechanical Properties of Cold-Sprayed Pure Nickel Coatings
    Zhengmao Zhang
    Yaxin Xu
    Wenya Li
    Jingwen Yang
    Chunjie Huang
    Journal of Thermal Spray Technology, 2024, 33 : 341 - 350
  • [32] The Effect of Post Heat Treatment on the Microstructure and Mechanical Properties of Cold-Sprayed Zn-6Cu Deposits
    Hu, Xiao-Zhen
    Tan, Xiao-Bo
    Xie, Bin
    Yao, Hai-Long
    Yang, Chao
    Zhou, Tao
    Materials, 2024, 17 (24)
  • [33] Heat-treatment and mechanical properties of cold-sprayed high strength Al alloys from satellited feedstocks
    Al-Hamdani, Kamaal S.
    Murray, James W.
    Hussain, Tanvir
    Clare, Adam T.
    SURFACE & COATINGS TECHNOLOGY, 2019, 374 : 21 - 31
  • [34] Correction to: Evolution of Cold-Sprayed Copper Deposit Mechanical Properties as Function of Substrate Geometry and Heat Treatment Parameters
    Dominique Poirier
    Bruno Guerreiro
    Jean-Gabriel Legoux
    Sylvain Bournival
    Stephen Yue
    Jason D. Giallonardo
    Journal of Thermal Spray Technology, 2025, 34 (1) : 202 - 202
  • [35] Thermo-Mechanical Finite Element Modeling of the Laser Treatment of Titanium Cold-Sprayed Coatings
    Rubino, Felice
    Astarita, Antonello
    Carlone, Pierpaolo
    COATINGS, 2018, 8 (06):
  • [36] Post-heat Treatment Effects on Cold-Sprayed Aluminum Coatings on AZ91D Magnesium Substrates
    Bu, Hengyong
    Yandouzi, Mohammed
    Lu, Chen
    Jodoin, Bertrand
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (3-4) : 731 - 739
  • [37] Post-heat Treatment Effects on Cold-Sprayed Aluminum Coatings on AZ91D Magnesium Substrates
    Hengyong Bu
    Mohammed Yandouzi
    Chen Lu
    Bertrand Jodoin
    Journal of Thermal Spray Technology, 2012, 21 : 731 - 739
  • [38] MICROTEXTURE AND ELECTRICAL AND MECHANICAL PROPERTIES OF THE COLD-SPRAYED COPPER DEPOSIT
    Watanabe, Yusuke
    Ichikawa, Yuji
    Ogawa, Kazuhiro
    Miura, Hideo
    PROCEEDINGS OF THE ASME INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, 2013, VOL 1, 2014,
  • [39] Cold-Sprayed Nanostructured Pure Cobalt Coatings
    Cavaliere, P.
    Perrone, A.
    Silvello, A.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (06) : 1168 - 1176
  • [40] Cold-Sprayed Nanostructured Pure Cobalt Coatings
    P. Cavaliere
    A. Perrone
    A. Silvello
    Journal of Thermal Spray Technology, 2016, 25 : 1168 - 1176