Power Quality Indices: A Saudi Steel Mill Case Study

被引：0

作者：

El-Amin, Ibrahim M. ^{[1
]}

Al-Elyani, Abdullah ^{[1
]}

Shuaib, Abdelrahman ^{[1
]}

机构：

[1] King Fahd Univ Petr & Minerals, Dept Elect Engn, Dhahran, Saudi Arabia

来源：

2013 INTERNATIONAL CONFERENCE ON COMPUTING, ELECTRICAL AND ELECTRONICS ENGINEERING (ICCEEE) | 2013年

关键词：

Power Quality; Harmonic levels; Harmonic Standards; Arc furnace; Non-linear Loads; Point of Common Coupling (PCC); flicker; TRANSFORMERS; HARMONICS;

D O I：

暂无

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

This paper presents results of field measurements of power quality indices at the terminals of an Electric Arc furnace connected at 34.5 kV to a 230 kV 60 Hz network in Saudi Arabia. The power quality indices that are measured are total harmonic distortion for voltage and current (THD V, THD I), individual harmonics, and flicker for short and long terms (P-st, P-lt). In addition, other electrical parameters are measured as well such as voltage (V-rms), current (I-rms), active power (P), reactive power (Q), power factor (PF), and frequency. All power quality parameters for both study cases are found to be within the IEEE and IEC standards. The installation of SVC and filters are mandatory. Long term Monitoring and country wide PQ study is recommended.

引用

页码：99 / 102

页数：4

共 50 条

[1] Steel mill tackles power quality and power factor problems
Cooper Power Systems Technical Cent, Franksville, United States
EC and M: Electrical Construction and Maintenance, 1996, 95 (09):
[2] Evaluating the Influence of Reverse Osmosis on Lakes Using Water Quality Indices: A Case Study in Saudi Arabia
Aljassim, Mohammed T.
Almulla, Abdulaziz A.
Berekaa, Mahmoud M.
Alsaif, Abdulmalik S.
WATER, 2024, 16 (10)
[3] Harmonic Mitigation Using Passive Harmonic Filters: Case Study in a Steel Mill Power System
Park, Byungju
Lee, Jaehyeong
Yoo, Hangkyu
Jang, Gilsoo
ENERGIES, 2021, 14 (08)
[4] STEEL MILL INFRARED SURVEILLANCE - A CASE-STUDY
SCHAUFLER, ER
PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS, 1982, 371 : 85 - 88
[5] Power quality aspects of arc steel melting furnace. A case study
Nikoloski, L
Rafajlovski, G
MELECON 2000: INFORMATION TECHNOLOGY AND ELECTROTECHNOLOGY FOR THE MEDITERRANEAN COUNTRIES, VOLS 1-3, PROCEEDINGS, 2000, : 916 - 919
[6] Optimization and Management of On-Site Power Plants Under Time-of-Use Power Price: A Case Study in Steel Mill
Zhao, Xiancong
Yuan, Huanmei
Zhang, Zefei
Bai, Hao
ENERGY TECHNOLOGY 2020: RECYCLING, CARBON DIOXIDE MANAGEMENT, AND OTHER TECHNOLOGIES, 2020, : 39 - 47
[7] POWER FOR NEW STEEL MILL IN IRAQ
不详
MECHANICAL ENGINEERING, 2012, 134 (06) : 14 - 14
[8] A Simulation Study for Power Quality Diagnosis and Optimal Solution Derivation in Steel Power Systems Affected by Large DC Mill Motor Loads
Park, Byung-Ju
Choi, Seok-Keun
Transactions of the Korean Institute of Electrical Engineers, 2024, 73 (10): : 1762 - 1767
[9] Experimental data on power quality assessment at point of common coupling of a steel mill to an electric power grid
Ugwuagbo, Emenike
Balogun, Adeola
Olajube, Ayobami
Omeje, Osita
Awelewa, Ayokunle
Abba-Aliyu, Shehu
DATA IN BRIEF, 2021, 39
[10] Refined power quality indices
Kandil, MS
Farghal, SA
Elmitwally, A
IEE PROCEEDINGS-GENERATION TRANSMISSION AND DISTRIBUTION, 2001, 148 (06) : 590 - 596

← 1 2 3 4 5 →