Delayed feedback control for chatter suppression in turning machines

被引：24
|
作者：
Mancisidor, I [1 ]
Pena-Sevillano, A. [1 ]
Dombovari, Z. [2 ]
Barcena, R. [3 ]
Munoa, J. [1 ]
机构：
[1] IK4 Ideko, Dynam & Control, Elgoibar 20870, Basque Country, Spain
[2] Budapest Univ Technol & Econ, Dept Appl Mech, Budapest, Hungary
[3] Univ Basque Country, Dept Elect Technol, EHU UPV, Bilbao 48013, Basque Country, Spain
来源：
MECHATRONICS | 2019年 / 63卷
基金：
欧盟地平线“2020”;
关键词：
Active control; Chatter; Delayed feedback; Orthogonal cutting; THE-LOOP SIMULATION; STABILITY; MODEL;
D O I：
10.1016/j.mechatronics.2019.102276
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The employment of active control devices has been demonstrated as one of the most effective methods to suppress chatter vibrations in machine tools. However, the commonly employed control laws are generalist and focused on the reduction of any type of vibration. The present work proposes a control law focused on the main cause of chatter vibrations. The strategy is based on a delayed feedback that distorts the regenerative effect and virtually reduces the overlap factor between successive waves. Experimental results show that the proposed law enables the suppression of chatter vibrations.
引用
收藏
页数：9
相关论文
共 50 条
  • [21] Integrated in-process chatter monitoring and automatic suppression with adaptive pitch control in parallel turning
    Shuntaro Yamato
    Yuki Yamada
    Kenichi Nakanishi
    Norikazu Suzuki
    Hayato Yoshioka
    Yasuhiro Kakinuma
    Advances in Manufacturing, 2018, 6 : 291 - 300
  • [22] Integrated in-process chatter monitoring and automatic suppression with adaptive pitch control in parallel turning
    Yamato, Shuntaro
    Yamada, Yuki
    Nakanishi, Kenichi
    Suzuki, Norikazu
    Yoshioka, Hayato
    Kakinuma, Yasuhiro
    ADVANCES IN MANUFACTURING, 2018, 6 (03) : 291 - 300
  • [23] Vibration Suppression of a Saturation Control System Using Delayed Feedback Control
    Zhao, Yan Ying
    VIBRATION, STRUCTURAL ENGINEERING AND MEASUREMENT II, PTS 1-3, 2012, 226-228 : 82 - 86
  • [24] Automatic selection of spindle speed for suppression of regenerative chatter in turning
    Tarng, YS
    Hseih, YW
    Li, TC
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 1996, 11 (01): : 12 - 17
  • [25] Chatter suppression in diamond turning using magnetic field assistance
    Li, Denghui
    Yip, Wai Sze
    Cao, Hongrui
    Zhang, Hanqian
    Tang, Yuk Ming
    To, Suet
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 321
  • [26] Optimization of multiple tuned mass dampers for chatter suppression in turning
    Yang, Yi-Qing
    Liu, Qiang
    Wang, Min
    Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 2010, 23 (04): : 468 - 474
  • [27] Chatter suppression with multiple time-varying parameters in turning
    Yang, Fulun
    Zhang, Bi
    Yu, Junyi
    American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 1999, 10 : 237 - 242
  • [28] A short review on investigation and suppression of tool chatter in turning operation
    Katiyar, Shivani
    Jaiswal, Muskan
    Narain, Ratneshwar Pratap
    Singh, Sarthak
    Shrivastava, Yogesh
    MATERIALS TODAY-PROCEEDINGS, 2022, 51 : 1206 - 1210
  • [29] Automatic selection of spindle speed for suppression of regenerative chatter in turning
    Tarng, Y.S.
    Hseih, Y.W.
    Li, T.C.
    1996, (11):
  • [30] Chatter suppression with multiple time-varying parameters in turning
    Yang, FL
    Zhang, B
    Yu, JY
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 141 (03) : 431 - 438
12345