Development of an inconel self powered neutron detector for in-core reactor monitoring

The paper describes the development and testing of an Incone1600 (2 mm diameter x 21 cm long) self-powered neutron detector for in-core neutron monitoring. The detector has 3.5 mm overall diameter and 22 cm length and is integrally coupled to a 12 m long mineral insulated cable. The performance of the detector was compared with cobalt and platinum detectors of similar dimensions. Gamma sensitivity measurements performed at the (CO)-C-60 irradiation facility in 14 MR/h gamma field showed values of -4.4 x 10(-18) A/R/h/cm (-9.3 x 10(-24) A/gamma/cm(2)-s/cm), -5.2 x 10(-18) A/R/h/cm (- 1.133 x 10(-23) A/gamma/cm(2)-s/cm) and 34 x 10(-18) A/R/h/cm (7.14 x 10(-23) A/gamma/cm(2)-s/cm) for the Inconel, Co and Pt detectors, respectively. The detectors together with a miniature gamma ion chamber and fission chamber were tested in the in-core Apsara Swimming Pool type reactor. The ion chambers were used to estimate the neutron and gamma fields. With an effective neutron cross-section of 4b, the Inconel detector has a total sensitivity of 6 x 10(-23) A/nv/cm while the corresponding sensitivities for the platinum and cobalt detectors were 1.69 x 10(-22) and 2.64 x 10(-22) A/nv/cm. The linearity of the detector responses at power levels ranging from 100 to 200 kW was within +/- 5 %. The response of the detectors to reactor scram showed that the prompt response of the Inconel detector was 0.95 while it was 0.7 and 0.95 for the platinum and cobalt self-powered detectors, respectively. The detector was also installed in the horizontal flux unit of 540 MW Pressurised Heavy Water Reactor (PHWR). The neutron flux at the detector location was calculated by Triveni code. The detector response was measured from 0.02% to 0.07% of full power and showed good correlation between power level and detector signals. Long-term tests and the dynamic response of the detector to shut down in PHWR are in progress. (c) 2007 Elsevier B.V. All rights reserved.