Destruction of perfluorooctanesulfonate (PFOS) in a batch supercritical water oxidation reactor

Effective technologies are needed for the destruction of per- and polyfluoroalkyl substances (PFAS). One promising technology is supercritical water oxidation (SCWO), which can be accommodated in batch or continuous reactors. Many PFAS-laden wastes consist primarily of solid particles, and batch SCWO processing may offer safe end-of-life PFAS destruction for these feedstocks. In this study, perfluorooctanesulfonate (PFOS) is reacted via supercritical water oxidation in a batch reactor at temperatures between 425 and 500 degrees C and residence times from 0 to 60 min, to determine the effect of both parameters on the extent of destruction and defluorination. Analysis of liquid products via targeted LC-QToF-MS does not indicate production of intermediate fluorocarbons. However, a low fluorine mass balance at temperatures of 425 and 450 degrees C may indicate the existence of fluorinated species in the gaseous and/or liquid product which are not detected by targeted analysis. Destruction and defluorination efficiencies are determined for each tested condition, with a maximum 70.0% PFOS destruction and 78.2% defluorination achieved after 60 min of reaction at 500 degrees C.