POSE SELECTION FOR THE KINEMATIC CALIBRATION OF A PROTOTYPED 4 DEGREES OF FREEDOM MANIPULATOR

被引：10

作者：

Horne, Andrew ^{[1
]}

Notash, Leila ^{[1
]}

机构：

[1] Queens Univ, Dept Mech & Mat Engn, Kingston, ON, Canada

来源：

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING | 2009年 / 33卷 / 04期

关键词：

pose selection; kinematic calibration; DESIGN;

D O I：

10.1139/tcsme-2009-0043

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper explores the pose selection for the kinematic calibration of the constraining linkage of a 4 degrees of freedom parallel manipulator. The aim is to select a set of poses out of a larger pool of possible poses which improve the calibration accuracy. Five different criteria have been suggested in the literature and are investigated in this article. The results show that the pose selection criteria did not significantly improve the calibration of this parallel manipulator. There was very little difference between applying the criteria and not applying it and some of the results using the criteria were worse than not using any criteria.

引用

页码：619 / 632

页数：14

共 50 条

[1] Kinematic Calibration of a Three Degrees-of-Freedom Parallel Manipulator With a Laser Tracker
He, Leiying
Li, Qinchuan
Zhu, Xubiao
Wu, Chuanyu
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2019, 141 (03):
[2] Powered condition number: A unified index for optimal pose selection in manipulator kinematic calibration
Khaleghian, M
Ahmadabadi, MN
PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS 2003, VOL 1-3, 2003, : 1843 - 1848
[3] A New Manipulator Calibration Method for the Identification of Kinematic and Compliance Errors Using Optimal Pose Selection
Phu-Nguyen Le
Kang, Hee-Jun
APPLIED SCIENCES-BASEL, 2022, 12 (11):
[4] The Effect of Redundant Degrees of Freedom on Manipulator's Kinematic Characteristics
Xu, Qinhuan
Zhan, Qiang
Cao, Xiujie
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ROBOTICS, CONTROL AND AUTOMATION ENGINEERING (RAE 2018) AND INTERNATIONAL CONFERENCE ON ADVANCED MECHANICAL AND ELECTRICAL ENGINEERING (AMEE 2018), 2018, : 127 - 131
[5] SYNTHESIS OF A NOVEL FIVE-DEGREES-OF-FREEDOM PARALLEL KINEMATIC MANIPULATOR
Dharmalingum, W. E.
Padayachee, J.
Bright, G.
SOUTH AFRICAN JOURNAL OF INDUSTRIAL ENGINEERING, 2021, 32 (01) : 131 - 143
[6] Simulation and code generation for a parallel kinematic manipulator with three degrees of freedom
Amann, R.
Geiger, F.
ELEKTRONIKA IR ELEKTROTECHNIKA, 2008, (01) : 27 - 30
[7] A Kinematic Calibration Technique for Robotic Manipulators with Multiple Degrees of Freedom
Katsiaris, Pantelis T.
Adams, Guy
Pollard, Stephen
Simske, Steven J.
2017 IEEE INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2017, : 358 - 363
[8] Kinematic calibration and pose measurement of a medical parallel manipulator by optical position sensors
Bai, SP
Teo, MY
JOURNAL OF ROBOTIC SYSTEMS, 2003, 20 (04): : 201 - 209
[9] Comparison of Pose Selection Criteria for Kinematic Calibration through Simulation
Horne, Andrew
Notash, Leila
COMPUTATIONAL KINEMATICS, PROCEEDINGS, 2009, : 291 - 298
[10] Automatic Calibration of a Six-Degrees-of-Freedom Pose Estimation System
Jansen, Wouter
Laurijssen, Dennis
Daems, Walter
Steckel, Jan
IEEE SENSORS JOURNAL, 2019, 19 (19) : 8824 - 8831

← 1 2 3 4 5 →