Coarse-grained β-Si3N4 powders prepared by combustion synthesis

被引:9
|
作者
Cui, Wei [1 ]
Li, Fei [1 ]
Tian, Zhaobo [1 ]
Zhang, Jie [1 ]
Du, Songmo [1 ]
Chen, Zhanglin [1 ]
Chen, Kexin [1 ]
Liu, Guanghua [1 ]
机构
[1] Tsinghua Univ, Sch Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
基金
中国国家自然科学基金; 中国博士后科学基金;
关键词
coarse‐ grained β ‐ Si-3  N-4; combustion synthesis; growth mechanism;
D O I
10.1111/jace.17747
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Coarse-grained beta-Si3 N4 powders were prepared by combustion synthesis under N-2 pressure of 6 MPa, with a low diluent content of not more than 10 wt.% and high reaction temperature of >1900 degrees C. beta-Si3 N4 was obtained as the major phase in the products, except for a small amount of residual Si. The addition of carbon black was effective to reduce the residual Si, but resulted in the formation of beta-SiC when too much carbon black was used. The coarse-grained beta-Si3 N4 powders consisted of beta-Si3 N4 crystals with an average thickness of more than 10 mu m, and some crystals were thicker than 20 mu m. The growth mechanism of the coarse beta-Si3 N4 crystals was discussed, associated with the particular reaction conditions in combustion synthesis.
引用
收藏
页码:2919 / 2923
页数:5
相关论文
共 50 条
  • [41] Combustion synthesis of α-Si3N4 with the addition of NH4Cl
    Tian, Zhaobo
    Zhang, Jie
    Sun, Siyuan
    Cui, Wei
    Zou, Yifeng
    Cheng, Huiming
    Liu, Guanghua
    CERAMICS INTERNATIONAL, 2018, 44 (16) : 20591 - 20594
  • [42] Combustion synthesis of α-Si3N4 assisted by molten salt additives
    Yi, Xuemei
    Li, Qingda
    Suzuki, Shota
    Zhang, Senjing
    Nomura, Takahiro
    Akiyama, Tomohiro
    CERAMICS INTERNATIONAL, 2019, 45 (08) : 10021 - 10027
  • [43] Effects of adding diluent iteratively on combustion synthesis of α-Si3N4
    Chen Yixiang
    Lin Zhiming
    Yang Yun
    Li Jiangtao
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 : 90 - 93
  • [44] Preparation of porous Si3N4 based ceramics by combustion synthesis
    Li, Wenkui
    Xiang, Junhuai
    Zhang, Baolin
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1087 - 1089
  • [45] Carbothermally prepared nanophase SiC/Si3N4 composite powders and densified parts
    Carroll, DF
    Weimer, AW
    Dunmead, SD
    Eisman, GA
    Hwang, JH
    Cochran, GA
    Susnitzky, DW
    Beaman, DR
    Conner, CL
    AICHE JOURNAL, 1997, 43 (11) : 2624 - 2635
  • [46] COMBUSTION SYNTHESIS OF SI3N4-SIC COMPOSITE POWDERS
    ZENG, JR
    MIYAMOTO, Y
    YAMADA, O
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1991, 74 (09) : 2197 - 2200
  • [47] Fabrication Porous Si3N4 -Glass Composite by Combustion Synthesis
    Li, Wenkui
    Luo, Shanshan
    Zhuang, Hanrui
    ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 1716 - +
  • [48] Mechanochemical-activation-assisted combustion synthesis of α-Si3N4
    Jin, HB
    Yang, Y
    Chen, YX
    Lin, ZM
    Li, JT
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (03) : 1099 - 1102
  • [49] Combustion synthesis of Si3N4/MoSi2 composite
    Xu, Jianguang
    Guo, Shibo
    Yan, Jianhui
    Zhang, Dagong
    POWDER TECHNOLOGY AND APPLICATION II, 2010, 92 : 41 - 45
  • [50] Combustion Synthesis of α-Si3N4 Powder Using AC as Additive
    Chen Yi-Xiang
    Yang Jian-Hui
    Jiang Zhi-Jun
    Lin Zhi-Ming
    Li Jiang-Tao
    JOURNAL OF INORGANIC MATERIALS, 2012, 27 (02) : 169 - 173