The Transverse Rupture Strength in Ti-6Al-4V Alloy Manufactured by Selective Laser Melting

被引：2

作者：

Lai, Pang-Hsin ^{[1
]}

Chen, Jhewn-Kuang ^{[1
]}

Wu, Ming-Wei ^{[1
]}

机构：

[1] Natl Taipei Univ Technol, Dept Mat & Mineral Resources Engn, Taipei 10608, Taiwan

来源：

2015 4TH INTERNATIONAL CONFERENCE ON ENGINEERING AND INNOVATIVE MATERIALS (ICEIM 2015) | 2015年 / 27卷

关键词：

MECHANICAL-PROPERTIES; MICROSTRUCTURE; BEHAVIOR;

D O I：

10.1051/matecconf/20152702010

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The objective of this study was to investigate the transverse rupture strength and apparent hardness of selective laser melted Ti-6Al-4V alloys manufactured in the vertical (V) and horizontal (H) directions. The microstructure and the distribution of alloy elements were examined by optical microscope and electron probe microanalysis, respectively. The results show that the columnar alpha' grains are formed along the building direction, and the elemental distributions of Ti, Al, and V are homogeneous in the alloy. The building direction does not sufficiently affect the density and apparent hardness. However, the transverse rupture strengths (TRS) are obviously dominated by the building directions investigated in this study. The TRS of an H specimen is significantly superior to that of a V specimen by 48%. This phenomenon can be mainly attributed to the presence of disc-shaped pores.

引用

页数：5

共 50 条

[21] Microstructure and micro-hardness analyses of titanium alloy Ti-6Al-4V parts manufactured by selective laser melting
Lancea, Camil
Chicos, Lucia-Antoneta
Zaharia, Sebastian Marian
Pop, Mihai Alin
4TH INTERNATIONAL CONFERENCE ON COMPUTING AND SOLUTIONS IN MANUFACTURING ENGINEERING 2016 - COSME'16, 2017, 94
[22] Laser melting of plasma nitrided Ti-6Al-4V alloy
KFUPM, Dhahran, Saudi Arabia
Wear, 1 ([d]140-149):
[23] Surface carburizing of Ti-6Al-4V alloy by laser melting
Saleh, A. F.
Abboud, J. H.
Benyounis, K. Y.
OPTICS AND LASERS IN ENGINEERING, 2010, 48 (03) : 257 - 267
[24] Investigation of Ti-6Al-4V alloy in situ manufactured using selective laser melting from elemental powder mixture
Polozov I.
Sufiiarov V.
Popovich A.
Solid State Phenomena, 2020, 299 : 646 - 651
[25] Effect of Built Geometry on the Microstructure and Strength Characteristics of the Ti-6Al-4V Alloy Prepared by the Selective Laser Melting
Kazantseva, N. V.
Ezhov, I. V.
Vinogradova, N. I.
Il'inykh, M. V.
Fefelov, A. S.
Davydov, D. I.
Oleneva, O. A.
Karabanalov, M. S.
PHYSICS OF METALS AND METALLOGRAPHY, 2018, 119 (11): : 1079 - 1086
[26] Microstructure of Ti-6Al-4V produced by selective laser melting
Simonelli, M.
Tse, Y. Y.
Tuck, C.
ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2011 (EMAG 2011), 2012, 371
[27] Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders
Facchini, Luca
Magalini, Emanuele
Robotti, Pierfrancesco
Molinari, Alberto
Hoeges, Simon
Wissenbach, Konrad
RAPID PROTOTYPING JOURNAL, 2010, 16 (06) : 450 - 459
[28] Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Yang, Jingjing
Yu, Hanchen
Yin, Jie
Gao, Ming
Wang, Zemin
Zeng, Xiaoyan
MATERIALS & DESIGN, 2016, 108 : 308 - 318
[29] Advancement of tribological properties of Ti-6Al-4V alloy fabricated by selective laser melting
Amanov, Auezhan
TRIBOLOGY INTERNATIONAL, 2021, 155
[30] Fundamental Properties of Ti-6Al-4V Alloy Produced by Selective Laser Melting Method
Morita, Tatsuro
Tsuda, Chika
Sakai, Hitoshi
Higuchi, Norio
MATERIALS TRANSACTIONS, 2017, 58 (10) : 1397 - 1403

← 1 2 3 4 5 →