Colour marking of transparent materials by laser-induced plasma-assisted ablation (LIPAA)

被引：13
|
作者：
Hanada, Yasutaka [1 ,2 ]
Sugioka, Koji [1 ,2 ]
Miyamoto, Iwao [2 ]
Midorikawa, Katsumi [1 ]
机构：
[1] RIKEN, Inst Phys & Chem Res, 2-1 Hirosawa, Wako, Saitama 3510198, Japan
[2] Univ Tokyo, Fac Ind Sci & Technol Sci, Dept Appl Elect, Noda, Chiba 2788510, Japan
来源：
COLA'05: 8TH INTERNATIONAL CONFERENCE ON LASER ABLATION | 2007年 / 59卷
关键词：
D O I：
10.1088/1742-6596/59/1/145
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
We demonstrate colour marking of a transparent material using laser-induced plasma-assisted ablation (LIPAA) system. After the LIPAA process, metal thin film is deposited on the surface of the ablated groove. This feature is applied to RGB (red, green and blue) colour marking by using specific metal targets. The metal targets, for instance, are Pb3O4 for red, Cr2O3 for green and [Cu(C32H15ClN8)] for blue colour marking. Additionally, adhesion of the metal thin film deposited on the processed groove by various experimental conditions is investigated.
引用
收藏
页码：687 / +
页数：2
相关论文
共 50 条
  • [21] Geometric and surface analysis of microchannels fabricated using laser-induced plasma assisted ablation (lipaa)
    Sarma, U.
    Joshi, Shrikrishna N.
    Lasers in Engineering, 2021, 49 (01) : 119 - 143
  • [22] Ultrafast fabrication of micro-channels and graphite patterns on glass by nanosecond laser-induced plasma-assisted ablation (LIPAA) for electrofluidic devices
    Xu, Shujia
    Liu, Bin
    Pan, Chengfeng
    Ren, Lei
    Tang, Biao
    Hu, Qiankun
    Jiang, Lelun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 247 : 204 - 213
  • [23] Optical diagnostics in laser-induced plasma-assisted ablation of fused quartz
    Hong, MH
    Sugioka, K
    Lu, YF
    Midorikawa, K
    Chong, TR
    1ST INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2000, 4088 : 359 - 362
  • [24] A comparative study of direct laser ablation and laser-induced plasma-assisted ablation on glass surface
    Xia, Yani
    Jing, Xiubing
    Zhang, Dawei
    Wang, Fujun
    Jaffery, Syed Husain Imran
    Li, Huaizhong
    INFRARED PHYSICS & TECHNOLOGY, 2021, 115
  • [25] Spatial and temporal thermo-physical analysis of Laser-induced plasma assisted ablation (LIPAA) of polycarbonate
    Sarma, Upasana
    Joshi, Shrikrishna N.
    OPTICS AND LASER TECHNOLOGY, 2022, 150
  • [26] Numerical modelling and simulation of microchannel fabrication on polycarbonate using Laser-Induced Plasma Assisted Ablation (LIPAA)
    Sarma, Upasana
    Joshi, Shrikrishna N.
    OPTIK, 2020, 223
  • [27] Effect of target on micromachining of sapphire using laser-induced plasma-assisted ablation
    Wen, Qiuling
    Chen, Jinhong
    Lu, Jing
    Mu, Dekui
    Jiang, Feng
    CERAMICS INTERNATIONAL, 2023, 49 (09) : 14470 - 14477
  • [28] Research Status and Development Trends for Energy Field-assisted Laser Induced Plasma-assisted Ablation of Transparent Brittle Materials
    Jiang A.
    Yan L.
    Wang N.
    Jiang F.
    Li Z.
    Wen Q.
    Lu X.
    Huang H.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2024, 60 (09): : 254 - 272
  • [29] Low resistivity glass metallization by laser induced plasma assisted ablation (LIPAA)
    Hong, MH
    Xie, Q
    Lim, BC
    Sugioka, K
    Midorikawa, K
    Ye, KD
    Shi, LP
    Chong, TC
    FIFTH INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2004, 5662 : 532 - 537
  • [30] High-speed machining of glass materials by laser-induced plasma-assisted ablation using a 532-nm laser
    J. Zhang
    K. Sugioka
    K. Midorikawa
    Applied Physics A, 1998, 67 : 499 - 501
12345