Structural integrity of quasi-isotropic composite laminates with embedded optical fibers

被引:2
|
作者
Skontorp, A [1 ]
机构
[1] Aeronaut Res Inst Sweden, Struct Dept, Composite Mech Sect, SE-16111 Bromma, Sweden
关键词
D O I
10.1106/T6CC-VA7D-FDK6-0BNG
中图分类号
TB33 [复合材料];
学科分类号
摘要
Embedded optical fibers are considered for use in structural monitoring of aircraft fiber-reinforced composite structures, such as wings and stabilizers. However, it is crucial that these optical fibers do not themselves significantly degrade the load-bearing ability of the composite. An embedded optical fiber, having a diameter an order of magnitude larger than the reinforcing fibers of a composite, alters the microstructure of the composite and gives rise to perturbations in the stress fields. The present study is an experimental investigation into how the introduction of embedded optical fibers affects the failure modes of a composite laminate. Quasi-isotropic composites with two realistic embedded optical fiber configurations were investigated, i.e. closely spaced optical fibers and optical fiber loops. Closely spaced optical fibers may be necessary near connectors and in some sensing schemes making use of multiple sensors. Similarly, changing the direction of an optical fiber is necessary in some sensing schemes and in cases where a single optical fiber is to be used to monitor a larger area. Static tensile and compressive experiments, as well as fatigue experiments, were conducted to study effects of the embedded optical fibers. Extensive post-failure fractographic examinations were carried out to identify if any failure modes were related to the presence of the optical fibers. Both room temperature dry, and high temperature (90 degrees C) wet conditions were considered. It was found that the embedded optical fibers did not initiate fiber-dominated failure in the composite, and therefore did not cause any significant deterioration of the composite strength, neither in tension nor in compression. However, the damage evolution process was affected by the optical fibers as they were preferred sites for matrix cracking, especially in the hot-and-wet condition. In fatigue, damage grew from the edges of the specimens, not from the optical fibers, and the fatigue life was not affected by the optical fibers.
引用
收藏
页码:1056 / 1077
页数:22
相关论文
共 50 条
  • [21] Experimental studies on compression-after-impact behavior of quasi-isotropic composite laminates
    Wang, H
    Chen, PH
    Shen, Z
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 1997, 6 (01): : 19 - 35
  • [22] A study of negative Poisson's ratio in randomly oriented quasi-isotropic composite laminates
    Yeh, HL
    Yeh, HY
    Zhang, RG
    JOURNAL OF COMPOSITE MATERIALS, 1999, 33 (19) : 1843 - 1857
  • [23] Simulation on size effect of notched quasi-isotropic composite laminates under tensile loading
    Tang, Kaili
    Bao, Hongchen
    Liu, Guangyan
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2016, 35 (22) : 1623 - 1633
  • [24] Effect of delamination on buckling behavior of quasi-isotropic laminates
    Korea Heavy Industries &, Construction Co., Ltd, Changwon, Korea, Republic of
    J Reinf Plast Compos, 12 (1262-1277):
  • [25] An efficient approach to determine compression after impact strength of quasi-isotropic composite laminates
    Esrail, Fardin
    Kassapoglou, Christos
    COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 98 : 28 - 35
  • [26] Fatigue damage of quasi-isotropic composite laminates under tensile loading in different directions
    In-Kweon Kim
    Chang-Duk Kong
    Kyung-Seop Han
    KSME International Journal, 2000, 14 : 483 - 489
  • [27] CHARACTERIZING TENSILE STRENGTH OF NOTCHED CROSS-PLY AND QUASI-ISOTROPIC COMPOSITE LAMINATES
    Tsai, Jia-Lin
    Chen, Chung-Wen
    JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, 2009, 32 (03) : 327 - 332
  • [28] Fatigue damage of quasi-isotropic composite laminates under tensile loading in different directions
    Kim, IK
    Kong, CD
    Han, KS
    KSME INTERNATIONAL JOURNAL, 2000, 14 (05): : 483 - 489
  • [29] Compressive failure analysis of quasi-isotropic composite laminates fabricated with quasi-unidirectional woven fabric
    Wang, Bo
    Maekawa, Kento
    Uda, Nobuhide
    Ono, Kousei
    Nagai, Hiroto
    JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (02) : 231 - 241
  • [30] Numerical simulation methodology for mode II delamination of quasi-isotropic quasi-homogeneous composite laminates
    Johar, Mahzan
    Israr, Haris Ahmad
    Low, Kean Ong
    Wong, King Jye
    JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (28) : 3955 - 3968