Effects of deposition temperature and time on the surface characteristics of TiN-coated high-speed steel by arc ion plating

被引：11

作者：

Kim, Hae Ji

Joun, Man Soo

机构：

[1] Dept. of Automotive Engineering, Jinju National University

[2] School of Mechanical and Aerospace Engineering, Gyeongsang National University

来源：

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2007年 / 21卷 / 04期

关键词：

arc ion plating; deposition temperature; deposition time; high speed steel; surface characteristics;

D O I：

10.1007/BF03026961

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

We present the effects of both deposition temperature and deposition time on the surface characteristics of TiN-coated high-speed steel(AISI M2) by arc ion plating. The microparticles, surface roughness, microhardness, coated layer thickness, adhesion strength, and atomic distribution of Ti, N, and Fe elements were measured for various deposition temperatures and times. The results demonstrated that a deposition temperature in the range of 400 to 500 degrees C had a slight influence on the surface characteristics, while a deposition time in the range of 10 to 180 min had a great influence on the microparticles, surface roughness, microhardness, coated thickness, atomic distribution of Ti, and adhesion strength.

引用

页码：575 / 584

页数：10

共 50 条

[21] INFLUENCE OF DEPOSITION CONDITIONS ON FATIGUE PROPERTIES OF MARTENSITIC STAINLESS STEEL WITH TIN FILM COATED BY ARC ION PLATING METHOD
Fukui, Satoshi
Yonekura, Daisuke
Murakami, Ri-Ichi
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (15-16): : 3095 - 3100
[22] Effect of substrate surface preparation on the performance and life of TiN-coated high speed steel circular saw blades
Lewis, D.B.
Bradbury, S.R.
Sarwar, M.
Surface and Coatings Technology, 1996, 82 (1-2): : 187 - 192
[23] Effect of substrate surface preparation on the performance and life of TiN-coated high speed steel circular saw blades
Lewis, DB
Bradbury, SR
Sarwar, M
SURFACE & COATINGS TECHNOLOGY, 1996, 82 (1-2): : 187 - 192
[24] An investigation of the tool-chip interface temperature and heat partition in high-speed machining of AISI/SAE 4140 steel with TiN-coated tool
Akbar, F.
Mativenga, P. T.
Sheikh, M. A.
PROCEEDINGS OF THE 35TH INTERNATIONAL MATADOR CONFERENCE: FORMERLY THE INTERNATIONAL MACHINE TOOL DESIGN AND RESEARCH CONFERENCE, 2007, : 215 - +
[25] Cutting behavior of a TiN-coated carbide drill with curved cutting edges during the high-speed machining of stainless steel
Lin, TR
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (01) : 8 - 16
[26] THE EFFECT OF A NON-METALLIC MATERIAL DEPOSIT IN DECREASING THE WEAR OF TIN-COATED HIGH-SPEED STEEL CUTTING TOOLS
PALMAI, Z
WEAR, 1984, 95 (01) : 1 - 7
[27] FAILURE MODE ANALYSIS OF TIN-COATED HIGH-SPEED STEEL - INSITU SCRATCH ADHESION TESTING IN THE SCANNING ELECTRON-MICROSCOPE
HEDENQVIST, P
OLSSON, M
JACOBSON, S
SURFACE & COATINGS TECHNOLOGY, 1990, 41 (01): : 31 - 49
[28] THE ROLE OF DEPOSITION PARAMETERS AND ADHESION EFFECTS ON THE FORMATION OF TIN FILMS ON HIGH-SPEED STEEL
AHERN, MJ
HASHMI, MSJ
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1992, 31 (03) : 349 - 361
[29] Characterization of TiN-coated high speed steel cutting edges by load-indentation measurements
Rother, B
Kappl, H
PfeiferSchaller, I
Jehn, HA
SURFACE & COATINGS TECHNOLOGY, 1996, 79 (1-3): : 225 - 230
[30] Active wear and failure mechanisms of TiN-coated high speed steel and TiN-coated cemented carbide tools when machining powder metallurgically made stainless steels
AB Sandvik Steel, Sandviken, Sweden
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1996, 27 A (09): : 2796 - 2808

← 1 2 3 4 5 →