Fabrication of Indium Tin Oxide targets by Spark Plasma Sintering and Hot-Pressing Sintering

被引：3
|
作者：
Guo, Wei [1 ]
Wang, Weimin [1 ]
Wang, Hao [1 ]
Wang, Yucheng [1 ]
Fu, Zhengyi [1 ]
机构：
[1] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
来源：
ADVANCED SYNTHESIS AND PROCESSING TECHNOLOGY FOR MATERIALS | 2009年 / 66卷
关键词：
Fabrication; Sintering; densification; ITO; SnO2; ITO;
D O I：
10.4028/www.scientific.net/AMR.66.96
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Indium Tin Oxide(ITO) is known as a poorly sinterable material The Spark Plasma Sintering(SPS) and the hot-pressing sintering(HP) were used to fabricate Indium Tin Oxide Ceramics from ITO nanoparticles. The maximum bulk density of 7 02 g/cm(2)(relative density; 98.2% TD)was obtained when sintered in Ar at 1000 degrees C for lmin by SPS sintering While the bulk density of 7 08 g/cm(2)(relative density, 99% TD) was obtained when sintered in Ar at 1050 degrees C for 4h by HP sintering
引用
收藏
页码：96 / 99
页数：4
相关论文
共 50 条
  • [41] Hot-Pressing Sintering Behavior and Properties of AlON/SiC Composites
    Zhao, Xiaojun
    Zhang, Ning
    Ru, Hongqiang
    Wang, Xiaoyang
    Kan, Hongmin
    CHINESE CERAMICS COMMUNICATIONS, 2010, 105-106 : 184 - +
  • [42] Sintering of nano Y-TZP materials by hot-pressing
    Li, W
    Gao, L
    Gui, LH
    Guo, JK
    JOURNAL OF INORGANIC MATERIALS, 2000, 15 (04) : 607 - 611
  • [43] Sintering of nano Y-TZP materials by hot-pressing
    Li, Wei
    Gao, Lian
    Gui, Linhua
    Guo, Jingkun
    Wuji Cailiao Xuebao/Journal of Inorganic Materials, 2000, 15 (04): : 607 - 611
  • [44] Microstructures and properties of Si3N4/TiN composites sintered by hot pressing and spark plasma sintering
    Zhou, Manyuan
    Zhong, Jie
    Zhao, Juan
    Rodrigo, Don
    Cheng, Yi-Bing
    MATERIALS RESEARCH BULLETIN, 2013, 48 (05) : 1927 - 1933
  • [45] Laser plasma sintering for fabricating indium tin oxide thin films
    Park, Taesoon
    Kim, Dongsik
    THIN SOLID FILMS, 2016, 615 : 177 - 182
  • [46] Fabrication of silicon nitride with high thermal conductivity and flexural strength by hot-pressing flowing sintering
    Li, Jianbin
    Jiang, Qiangguo
    Pan, Zhifeng
    Lv, Donglin
    Wu, Shanghua
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2024, 21 (04) : 2841 - 2849
  • [47] Fabrication and characterization of oxide dispersion strengthened (ODS) 14Cr steels consolidated by means of hot isostatic pressing, hot extrusion and spark plasma sintering
    Hilger, I.
    Boulnat, X.
    Hoffmann, J.
    Testani, C.
    Bergner, F.
    De Carlan, Y.
    Ferraro, F.
    Ulbricht, A.
    JOURNAL OF NUCLEAR MATERIALS, 2016, 472 : 206 - 214
  • [48] Spark Plasma Sintering and Hot Pressing of Hetero-Doped LaNbO4
    Syvertsen, Guttorm E.
    Estournes, Claude
    Fjeld, Harald
    Haugsrud, Reidar
    Einarsrud, Mari-Ann
    Grande, Tor
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2012, 95 (05) : 1563 - 1571
  • [49] Modeling of hybrid method as combined spark plasma sintering and hot pressing physical processes
    Smirnov, Andrey V.
    Yushin, Denis I.
    Zverev, Igor A.
    Maslov, Andrey R.
    Torrecillas, Ramon
    MECHANICS & INDUSTRY, 2015, 16 (07)
  • [50] Sintering comparison of NiCoCrAl-Ta powder processed by hot pressing and spark plasma
    Juarez G, Jose M.
    Jaramillo, David, V
    Cuenca A, Ricardo
    Juarez L, Fernando
    POWDER TECHNOLOGY, 2012, 221 : 264 - 270
12345