Excimer laser processing of grey cast iron: Microstructural and tribological characterization

被引：2
|
作者：
Marest, G
Fontes, A
Jeandin, M
Fayeulle, S
Vardavoulias, M
Frainais, M
机构：
[1] CNRS, IN2P3, Inst Nucl Phys, F-69622 Villeurbanne, France
[2] Univ Lyon 1, F-69622 Villeurbanne, France
[3] Ecole Mines, Ctr Mat PM Fourt, F-91003 Evry, France
[4] Ecole Cent Lyon, F-69131 Ecully, France
[5] PSA, Peugeot Citroen, F-92366 Meudon, France
来源：
HYPERFINE INTERACTIONS | 1998年 / 112卷 / 1-4期
关键词：
Iron; Thin Film; Graphite; Carbide; Austenite;
D O I：
10.1023/A:1011016022614
中图分类号：
O64 [物理化学（理论化学）、化学物理学]; O56 [分子物理学、原子物理学];
学科分类号：
070203 ; 070304 ; 081704 ; 1406 ;
摘要：
Pearlitic grey iron was treated by means of a XeCl laser to remelt only a shallow layer. This process allows to modify the heteregeneous surfaces of cast irons in order to improve their tribological behaviour. The energy density ranged from 0.3 to 3 J/cm(2) and the number of shots from 4 to 40, it is shown that after laser irradiation austenite is formed in the melted layer; compressive stresses at the surface were exhibited as well as the deposition of graphite and the formation of carbides. It is shown that excimer laser processing highly decreases the coefficient of friction and the wear rate.
引用
收藏
页码：39 / 42
页数：4
相关论文
共 50 条
  • [41] DLC deposited onto nitrided grey and nodular cast iron substrates: An unexpected tribological behaviour
    Giacomelli, Renan Oss
    Salvaro, Diego Berti
    Binder, Cristiano
    Klein, Aloisio Nelmo
    Biasoli de Mello, Jose Daniel
    TRIBOLOGY INTERNATIONAL, 2018, 121 : 460 - 467
  • [42] Effect of Spot Continual Induction Hardening on the Tribological Performance of Grey Cast iron with Curved Surface
    Qin, Xunpeng
    Gao, Kai
    Wang, Zhou
    Chen, Xuliang
    TRIBOLOGY TRANSACTIONS, 2018, 61 (01) : 185 - 193
  • [43] Hardness characterisation of grey cast iron and its tribological performance in a contact lubricated with soybean oil
    Bahari, Adli
    Lewis, Roger
    Slatter, Tom
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2018, 232 (01) : 190 - 203
  • [44] Fabrication of protruded laser textures on grey cast iron for enhanced tribological performance under SAE 10W-30 lubrication
    Murari, Govind
    Nahak, Binayak
    Pratap, Tej
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2025,
  • [45] Tribological characterization of copper alloyed austempered gray cast iron (AGI)
    Sarkar, Tanmoy
    Sutradhar, Goutam
    MATERIALS RESEARCH EXPRESS, 2018, 5 (06):
  • [46] Coaxial Laser Cladding of Cobalt-Base Alloy Stellite™ 6 on Grey Cast Iron Analysis of the Microstructural and Mechanical Properties Depending on the Laser Power
    Kiehl, Maximilian
    Scheid, Adriano
    Graf, Karin
    Ernst, Benedikt
    Tetzlaff, Ulrich
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (08) : 3821 - 3838
  • [47] Coaxial Laser Cladding of Cobalt-Base Alloy Stellite™ 6 on Grey Cast Iron Analysis of the Microstructural and Mechanical Properties Depending on the Laser Power
    Maximilian Kiehl
    Adriano Scheid
    Karin Graf
    Benedikt Ernst
    Ulrich Tetzlaff
    Journal of Materials Engineering and Performance, 2023, 32 : 3821 - 3838
  • [48] The effects of cryogenic processing on the wear resistance of grey cast iron brake discs
    Thornton, R.
    Slatter, T.
    Jones, A. H.
    Lewis, R.
    WEAR, 2011, 271 (9-10) : 2386 - 2395
  • [49] Microstructural characterization, tribological and corrosion behaviour of forged and cast grinding balls a comparative study
    Bouhamla K.
    Gharbi A.
    Ghelloudj O.
    Hadji A.
    Maouche H.
    Remili S.
    Chettouh S.
    Defect and Diffusion Forum, 2021, 406 : 334 - 347
  • [50] A MICROSTRUCTURAL STUDY OF LOCAL MELTING OF GREY CAST-IRON BY A STATIC PLASMA-ARC
    ISHIDA, T
    JOURNAL OF MATERIALS SCIENCE, 1985, 20 (01) : 213 - 228
12345