CFD modelling and design optimization of a gerotor pump

被引：0
|
作者：
Iudicello, F [1 ]
机构：
[1] Hobourn Automot, Rochester, England
来源：
FLUID MACHINERY FOR THE OIL, GAS, AND PETROCHEMICAL INDUSTRY | 2003年 / 2003卷 / 01期
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Gerotor pumps are widely used in the automotive industry for fuel lift and injection, engine oil lubrication and in transmission systems. The CFD analysis of gerotor pumps can help optimise flow performance and reduce cavitation damage and noise. In this paper, a CFD design optimisation of a fuel lift gerotor pump has been conducted using a 3-D transient model with moving and deforming boundaries. The effect of different design parameters, such as porting geometry and rotor clearances has been investigated. Results showed that the rotor clearances and the inlet grooves arc! the most influential parameters for pump performance, while for noise and cavitation damage, porting sealing are most important. The optimum pump design was verified using experimental data.
引用
收藏
页码：15 / 25
页数：11
相关论文
共 50 条
  • [41] DESIGNING OF THE GEROTOR PUMP BODY MADE OF PLASTICS
    Krawczyk, Justyna
    Stryczek, Jaroslaw
    PROCEEDINGS OF THE 9TH FPNI PH.D SYMPOSIUM ON FLUID POWER, 2016, 2017,
  • [42] GEROTOR FUEL PUMP PERFORMANCE AND LEAKAGE STUDY
    Alberto Ruvalcaba, Mario
    Hu, Xiao
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 6, PTS A AND B, 2012, : 807 - 815
  • [43] Design and experiment of desulphurization pump based on CFD
    Liu, Jianrui
    Xiao, Zhijie
    Wang, Hongrui
    Teng, Renbo
    Paiguan Jixie/Drainage and Irrigation Machinery, 2009, 27 (01): : 6 - 9
  • [44] CFD applied to heat pump system design
    Elgowainy, A
    2002 37TH INTERSOCIETY ENERGY CONVERSION ENGINEERING CONFERENCE (IECEC), 2002, : 470 - 474
  • [45] EXPERIMENT DESIGN IN A LIGHT OF CFD MODELLING
    Forman, Matej
    Krejci, Vladimir
    Kosner, Jan
    EXPERIMENTAL FLUID MECHANICS 2006, PROCEEDINGS, 2006, : 51 - 53
  • [46] An Investigation of Ejector Design by CFD Modelling
    Marynowski, T.
    Desevaux, P.
    Mercadier, Y.
    INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, 2009, 26 (01) : 61 - 78
  • [47] Design of micromixers using CFD modelling
    Aubin, J
    Fletcher, DF
    Xuereb, C
    CHEMICAL ENGINEERING SCIENCE, 2005, 60 (8-9) : 2503 - 2516
  • [48] Modelling design and blade profile optimization for a mixed-flow pump impeller
    Shi, Y. (syj@dlut.edu.cn), 1600, Sila Science, University Mah Mekan Sok, No 24, Trabzon, Turkey (32):
  • [49] Optimization Design of a Double-Channel Pump by Means of Orthogonal Test, CFD, and Experimental Analysis
    Zhao, Binjuan
    Hou, Douhua
    Chen, Huilong
    Wang, Yu
    Qiu, Jing
    ADVANCES IN MECHANICAL ENGINEERING, 2014,
  • [50] Reverse Engineering Used to Profile a Gerotor Pump Rotor
    Baroiu, Nicusor
    Teodor, Virgil Gabriel
    Paunoiu, Viorel
    Morosanu, Georgiana-Alexandra
    Dumitrescu, Ionas-Catalin
    APPLIED SCIENCES-BASEL, 2023, 13 (19):
12345