Electrochemical properties of Al doped Li(Ni1/3Co1/3Mn1/3)O2

被引：2
|
作者：
Kim, Seon Hye [1 ]
Shim, Kwang Bo [1 ]
Han, Kyoung Ran [2 ]
Kim, Chang-Sam [3 ]
机构：
[1] Hanyang Univ, Dept Ceram Engn, 17 Haengdang Dong, Seoul 133791, South Korea
[2] Korea Adv Inst Sci & Technol, Div Mat Sci & Technol, Seoul 130650, South Korea
[3] Korea Adv Inst Sci & Technol, Battery Res Ctr, Seoul 130650, South Korea
来源：
ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2 | 2007年 / 124-126卷
关键词：
lithium ion battery; lithium nickel cobalt manganese oxide; Al doping; oxidation state; cycle stability;
D O I：
10.4028/www.scientific.net/SSP.124-126.1023
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Al doped Li(Ni1/3Co1/3Mn1/3-xAlx)O-2 (x=0.005, 0.01, 0.05) and Li(Ni1/3-x/2Co1/3Mn1/3-x/2Alx)O-2 (x=0.01, 0.05) cathode materials for lithium ion batteries were synthesized using an ultrasonic spray pyrolysis and heat treatment. The substitution with Al reduced the content of Mn3+, promoted grain growth, and broadened the particle size distribution of synthesized powders. The initial discharge capacity of cells made with 0.5 mol% Al doped Li(Ni1/3Co1/3Mn1/3-0.005Al0.005)O-2 powder was as high as that of the undoped (similar to 180 mAhg(-1), 3.0-4.5 V), and showed an excellent cycle stability. The improvement of the cycle stability was considered to be due to the decrease of Mn3+ in Li(Co1/3Ni1/3Mn1/3-xAlx)O-2 by Al doping.
引用
收藏
页码：1023 / +
页数：2
相关论文
共 50 条
  • [31] Synthetic optimization of Li[Ni1/3Co1/3Mn1/3]O2 via co-precipitation
    Lee, MH
    Kang, Y
    Myung, ST
    Sun, YK
    ELECTROCHIMICA ACTA, 2004, 50 (04) : 939 - 948
  • [32] Influence of pretreatment process on structure, morphology and electrochemical properties of Li[Ni1/3Co1/3Mn1/3]O2 cathode material
    Yang Shun-yi
    Wang Xian-you
    Liu Zi-ling
    Chen Quan-qi
    Yang Xiu-kang
    Wei Qi-liang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (09) : 1995 - 2001
  • [33] Influence of charge status on the stress safety properties of Li(Ni1/3Co1/3Mn1/3)O2 cells
    Zhou, Shuo
    Wang, Guixin
    Xiao, Yao
    Li, Qian
    Yang, Dongmin
    Yan, Kangping
    RSC ADVANCES, 2016, 6 (68): : 63378 - 63389
  • [34] Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries
    Shaju, KM
    Rao, GVS
    Chowdari, BVR
    ELECTROCHIMICA ACTA, 2002, 48 (02) : 145 - 151
  • [35] Superior electrochemical properties of Li(Ni1/3Co1/3Mn1/3)O2/C synthesized by the precursor solid-phase method
    Jiang, Qianqian
    Xu, Lei
    Li, Xingyue
    Zhang, Han
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2015, 121 (01): : 23 - 28
  • [36] Surface Structure, Morphology, and Stability of Li(Ni1/3Mn1/3Co1/3)O2 Cathode Material
    Garcia, Juan C.
    Bareno, Javier
    Yan, Jianhua
    Chen, Guoying
    Hauser, Andrew
    Croy, Jason R.
    Iddir, Hakim
    JOURNAL OF PHYSICAL CHEMISTRY C, 2017, 121 (15): : 8290 - 8299
  • [37] Superior electrochemical properties of Li(Ni1/3Co1/3Mn1/3)O2/C synthesized by the precursor solid-phase method
    Qianqian Jiang
    Lei Xu
    Xingyue Li
    Han Zhang
    Applied Physics A, 2015, 121 : 23 - 28
  • [38] A modified ZrO2-coating process to improve electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2
    Huang, Youyuan
    Chen, Jitao
    Ni, Jiangfeng
    Zhou, Henghui
    Zhang, Xinxiang
    JOURNAL OF POWER SOURCES, 2009, 188 (02) : 538 - 545
  • [39] Synthesis of nanostructured Li[Ni1/3Co1/3Mn1/3]O2 via a modified carbonate process
    Park, SH
    Shin, HS
    Myung, ST
    Yoon, CS
    Amine, K
    Sun, YJ
    CHEMISTRY OF MATERIALS, 2005, 17 (01) : 6 - 8
  • [40] Crystal structure and size effects on the performance of Li[Ni1/3Co1/3Mn1/3]O2 cathodes
    Jianxin Zhu
    Kevin Yoo
    Akhila Denduluri
    Wenting Hou
    Juchen Guo
    David Kisailus
    Journal of Materials Research, 2015, 30 : 286 - 294
12345